Renaming Profiles - Nokia 6210 User Manual

M e n u f u n c t i o n s
3. Select Personalise
Note: Selecting Activate
selected profile the current one, the
profile cannot be customised in this way.
When the phone is connected to the
CARK-91car kit or the HDC-9P headset,
the Activate function will not be
available.
4. Scroll to the setting you wan to
customise and press Select.
5. Scroll to the desired option and press OK.
Settings you can personalise
Once you have selected the
option, you can customise the following
settings of the selected profile:
• Incoming call alert
phone notifies you of an incoming voice
call. The options are: Ringing, Ascending,
Ring once, Beep Once
When Incoming call alert
ringing tone or other alert tones will be
heard. This silent mode is indicated by .
• Ringing tone to set the ringing tone type
for voice calls.
Tip: If you receive a ringing tone
via IR or OTA, you can store five
ringing tones at a time in the
ringing tone list. If you receive a
ringing tone via IR or OTA, and
there is no space for the ringing
tone in the ringing tone list, you
can replace one of the tones in
the ringing list with the new
ringing tone.
• Ringing volume to set the volume level
for the ringing and message alert tones.
• Vibrating alert to set the phone to vibrate
at an incoming voice call and at an
incoming message. The vibrating alert
does not work when the phone is
connected to a charger or desktop stand.
and press OK.
only makes the
Personalise
to define how the
and Off.
is set to Off, no
Copyright © 2004 Nokia. All rights reserved.
• Message alert tone
tone type for messages.
• Keypad tones to set the volume level for
keypad tones or to set the keypad tones
off.
• Warning tones to set the warning tones
on or off. For example, when set to on, the
phone sounds a warning tone when the
battery is running out of power.
• Alert for to set the phone to ring only
upon calls from phone numbers that
belong to a selected caller group. Use the
scroll keys or
group and press Mark.
To set a ringing tone and a group graphic
for a caller group, see
tone and graphic for a caller group and
renaming a caller group" on page
• Automatic answer
Headset profiles only) to set the phone to
answer an incoming voice call after a few
seconds.
Note: This function can only be used
when your phone is connected to a
headset or to a car kit equipped with the
ignition sense option, with the ignition
switched on.
• Lights (in Handsfree
the display and keypad lights to
Automatic.

Renaming profiles

You can rename the profiles to your personal
liking except for the General,
Headset profiles.
1. Press Menu, scroll with
Profiles and press Select.
2. Scroll to the profile you want to rename
and press Options, then scroll to
and press OK.
3. Enter the new name and press OK. To
enter letters, see "Storing names and
numbers" on page
to set the ringing
to reach the desired
"Setting a ringing
22.
(in Handsfree and
profile only) to set
On or
Handsfree and
or to
Rename
15.
33