Nokia 6210 26.09.00 NOTE! Nokia **** in the pictures means in this document Nokia 6210 Quick Guide to Using the Nokia 6210 with Windows NT 4.0 RAS 1. Installing and setting up Proceed as follows: 1. Install the Nokia 6210 modem driver in Windows NT 4.0 2.
Figure 2. Adding Remote Access Service. 7. You should now see the ‘Add RAS Device’ window with the RAS Capable Device: COM2 - Nokia 6210 Cable, click OK (Figure 3.) Figure 3. Add RAS Device. 8. You can now configure port usage (Figure 4).
Figure 4. Configure Port Usage. 9. You can now set up the Network Configurations (Figure 5). Copyright ã 1995 - 2000. Nokia All rights reserved. 3(6)
10. Your Remote Access Service has now been successfully installed. Use Remote Access Admin or User Manager in the Administrative Tools folder to assign Remote Access permission to users. 11. Reboot your computer now. Copyright ã 1995 - 2000. Nokia All rights reserved. 4(6)
You can now start Remote Access Admin so that you can monitor the Remote Access connection. Click Start, click Programs, click Administrative Tools, click Remote Access Admin (Figure 7.) Figure 7. Remote Access Admin Port Status. Copyright ã 1995 - 2000. Nokia All rights reserved. 5(6)
Nokia reserves the right to revise this document or to withdraw it at any time without prior notice.