Call Costs (Menu 2-6); Profiles (Menu 3); Activating A User Profile; Customising Profiles - Nokia 6210 User Manual

Call costs (Menu 2-6)

This network service allows you to check the
cost of your last call or all calls. The call
costs are shown separately for each SIM
card. You can limit the cost of your calls to a
certain amount of charging units or units of
currency by using the option
You can make and receive charged calls as
long as the specified cost limit is not
exceeded. The number of remaining units is
shown in the standby mode. You may need
the PIN2 code to set the cost limit. You can
set the phone to show the remaining talk
time (cost limit) in terms of charging units
or units of currency by using the option
Show cost. You may need the PIN2 code to
select the currency or unit. Contact your
service provider for charging unit prices. The
option Clear counter
the call cost counters. To clear the counters
you need the PIN2 code. See
on page 50.
Note: When no more charging or
currency units are left, only calls to
the emergency number 112 may be
possible.
The actual time invoiced for calls by
your service provider may vary,
depending upon network features,
rounding-off for billing, and so
forth.
32
Call cost limit.
s allows you to reset
"Access codes"
Copyright © 2004 Nokia. All rights reserved.
■ Profiles
(Menu 3)
Within the Profiles menu, you can adjust and
customise the phone tones for different
events, environments and caller groups.

Activating a user profile

If you want to change the currently selected
profile (General as default), press the
key quickly (in the standby mode). Then scroll
with or to the profile you want to
activate and press OK.
Tip: Press the
the standby mode). Then press the
key corresponding to the number of
the profile and wait for three
seconds. For example, to activate
the Silent profile, first press the
key quickly and then press

Customising Profiles

1. Press Menu, scroll to
Select. The following list of options
appears: General, Silent, Meeting,
Outdoor, Pager, Handsfree, Headset.
Note: Handsfree and
appear in the Profiles
91 car kit or the HDC-9P headset are
connected to your phone. However, the
settings for the Handsfree
will remain in the menu once connected.
2. Scroll to the desired profile and press
Options.
M e n u f u n c t i o n s
key quickly (in
.
Profiles and press
Headset will not
list unless the CARK-
and Headset