Tone Settings For Profiles; Other Settings For Profiles; Renaming Profiles; Settings (Menu 4) - Nokia 8850 User Manual

Tone settings for profiles

Incoming call alert
This setting defines how the phone will notify you
about an incoming voice call. The options available
are: Ringing, Ascending,
Beep Once, Caller Groups
Caller groups
The phone will ring only when calls are received
from phone numbers which belong to the
selected caller group. (Also a graphic is shown,
if specified to the group.)
Scroll to the desired group and press Mark to
select or Unmark to deselect it. Repeat this as
many times as necessary. Next, press Back and
then Yes to save or No to discard the changes.
See also '4. Phone book', 'Caller groups'.
Ringing tone
Sets the ringing tone for voice calls.
Ringing volume
Sets the volume level for the ringing and
message alert tones.
Vibrating alert
Sets the phone to vibrate when a voice call is
received. The vibrator does not operate when the
phone is connected to a charger or a deskstand.
Message alert tone
Sets the ringing tone for text messages.
Keypad tones
Sets the volume level for keypad tones.
Warning and game tones
Sets the phone to sound a warning tone, for
example when the battery is running out of power
or when you play one of the games offered by your
phone. This setting has no effect on the tones
which are related to network services.
2
Car will not appear in the Profiles list unless Plug & Play Handsfree kit PPH-1 is connected to your phone.
However, the settings for the Car will remain in the menu once connected.
Ring once,
and Off.
42

Other settings for profiles

Automatic answer (in car and
headset profiles only)
Sets the phone to answer an incoming voice call
after a single ring. Scroll to
OK.

Renaming profiles

This function allows you to edit the name of the
selected profile. This function is not available in
the
General , Headset
1. When the desired Profile is highlighted, press
Options.
2. Scroll to
Rename
3. Enter the new name and press OK.

Settings (Menu 4)

Alarm clock
(Menu 4-1)
In this menu the phone can be set to alarm at a
specified time. If the alarm time is set, select
to change the time or
clock off. The alarm clock will work even when
the phone is switched off.
The alarm clock uses the time format set for the
clock, either 12-hours or 24-hours. See Menu 4-2.
When the alarm time is reached
The phone sounds an alert tone. When the
phone is alerting,
ALARM!
the phone's lights flash. If you let the phone
sound the alarm for a full minute or if you press
any other key, the alarm stops for a few minutes
and then resumes. You can end this 'snoozing'
by pressing Stop or by switching the phone off.
or and press
On Off
profiles.
and Car
and press OK.
to turn the alarm
Off
is also shown and
On