Page of 6

Nokia 6210 Quick Manual

Nokia 6210: quick start.
Hide thumbs
   
Quick Guide to Using the Nokia 6210 with Lotus cc:Mail 8.2
1. Installation and setting up
Install the client as instructed in the Lotus cc:Mail 8.2 (later called cc:Mail in this document) User Guide. You must
also have the correct settings for your post office, etc., available when installing the client. Before using the Nokia
products you have to copy a script file to the location where all other *.MDM files are stored. (for example
C:\LOTUS\CCMAIL\MDM).
The Nokia files can be downloaded from our support web pages which can be found at http://www.forum.nokia.com
When the files are copied to the correct location, the cc:Mail has to be configured from Actions -> Locations...
(Figure 1).
Figure 1. Starting setup ..
Then choose one of the locations and choose Edit.. When Edit is selected the main window of the location is opened.
Choose the Connections tab (Figure 2).
Copyright ã 2000. Nokia
All rights reserved.
.
Nokia 6210
17.04.00
1(6)

Advertising

   Related Manuals for Nokia 6210

   Summary of Contents for Nokia 6210

  • Page 1

    Install the client as instructed in the Lotus cc:Mail 8.2 (later called cc:Mail in this document) User Guide. You must also have the correct settings for your post office, etc., available when installing the client. Before using the Nokia products you have to copy a script file to the location where all other *.MDM files are stored. (for example C:\LOTUS\CCMAIL\MDM).

  • Page 2

    Then choose the port settings and change them to their correct status; it is only necessary to change port and speed settings (Figure 4). NOTE: To find out which port the Nokia 6210 is using, open the Win95/98 Modems (Start ->Settings ->Control Panel ->Modems) and look at the Modem entries and select Nokia 6210 and properties and check the COM...

  • Page 3

    You also have to edit the post office settings. This can be done by choosing Edit…. (under the server icon) (Figure 6). Select New.. and the post office settings can then be added. Copyright ã 2000. Nokia All rights reserved.

  • Page 4

    Add the relevant country code (choose the correct country from the list), add the area code (without the first zero), followed by the phone number without the area and country codes. After this, accept with the OK button (Figure 8). Copyright ã 2000. Nokia All rights reserved.

  • Page 5

    Figure 9. Connection confirmation. 1.2 Troubleshooting Make sure that there are NO PARENTHESES in the phone number (NO SEPARATE AREA CODE AND PHONE NUMBER => SET ALL NUMBERS IN THE PHONE NUMBER FIELD) Copyright ã 2000. Nokia All rights reserved.

  • Page 6

    Nokia reserves the right to revise this document or to withdraw it at any time without prior notice.

Comments to this Manuals

Symbols: 0
Latest comments: