1. Installing and setting up First you have to create a new connection for The Nokia 6210. Choose the My computer icon à à à à Dial-up networking à à à à Make a new connection. This opens a Window where you can choose the right modem and name the connection (Figure 1).
14.4-Kb/s data line, only the AT command is different. To enable the transmission of 14.4 Kb/s data please type +CBST=14 instead of S35=0. Copyright ã 1995 - 2000. Nokia All rights reserved.
Figure 4. General settings. Under the Server Type… button select the appropriate settings according to those you received from your ISP… (Figure 5). Copyright ã 1995 - 2000. Nokia All rights reserved. 3(7)
Figure 5. Server types. Copyright ã 1995 - 2000. Nokia All rights reserved. 4(7)
ISP (Figure 6). Please check if you can use Server assigned IP address as well as Server assigned name server addresses. When you have selected all the necessary settings, close the window by choosing the OK button. Figure 6. TCP/IP settings. Copyright ã 1995 - 2000. Nokia All rights reserved. 5(7)
When the connection is established a modem icon will appear in your taskbar (with two flashing red/green dots in it) and it is then possible to open, for example, Netscape or Internet Explorer to browse the Internet. Copyright ã 1995 - 2000. Nokia All rights reserved.
Nokia reserves the right to revise this document or to withdraw it at any time without prior notice.