Left-Hand Handlebar Switch; Headlight Dimmer Switch; Turn Signal Switch; Horn Button - KYMCO PEOPLE 50 Owner's Manual

CONTROLS & FEATURES
Left handlebar switch
3 3 3 3 3
4 4 4 4 4
Headlamp switch -- UP 3 3 3 3 3 :
The upper switch position turns the headlight high beam on.
The high beam indicator light on the dash is activated as well.
Headlamp switch -- DOWN 4 4 4 4 4 :
The lower switch position turns the headlight low beam on.
Passing light button - PRESS DOWN 5 5 5 5 5 :
When downward pressure is applied to the headlight rocker
switch, the high beam is activated. When pressure is released,
the low beam setting is restored. This enables you to rapidly flick
high beam on and off to signal other vehicles that you wish to
pass.
12
5 5 5 5 5

Turn signal switch:

Use the turn signal indicator to signal to other traffic that you
intend to turn or change lanes. The turn signal light on the
dash will flash to indicate that the switch is engaged.
6 6 6 6 6 Slide the turn switch to the left to activate the left turn signal.
7 7 7 7 7 Slide the switch to the right to activate the right turn signal.
To cancel the turn signal, press down on the signal switch 8.

Horn button 9 9 9 9 9 :

Press the horn button to sound the horn.
NOTE: The horn will only sound when the ignition is "ON".
8 8 8 8 8
6 6 6 6 6
9 9 9 9 9
7 7 7 7 7