7.1.2
Choosing the Output Resolution
You can select the output resolution (choosing the pixel resolution, as section
6.1 describes), by pressing the OUT button
key on the infra-red remote control transmitter (see Figure 49). The OSD
status appears superimposed over the top right corner of the screen for a few
2
seconds
, as Figure 9 illustrates
7.2 Controlling the Seamless Switcher / Scaler
You can control the Seamless Switcher / Scaler via:
• The front panel OSD control buttons (see section 7.3)
• The infra-red remote control transmitter (see section 7.3.8)
• RS-232 remote control
7.3 Operating via the OSD MENU Screen
The OSD superimposes a menu on the screen from which you can control your
the VP-720DS or VP-723DS, using the MENU, ENTER, -, +, UP and DOWN
front panel OSD buttons.
Pressing the MENU front panel OSD button or the MENU key on the
infra-red remote control transmitter (see Figure 49) displays the first OSD
screen, the "Menu screen" (see Figure 10), which displays six interactive
4
icons
(defined in Figure 11).
1 Item 16 in Figure 1
2 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 7.3.6.6
3 Adjusting the output resolution results in a corresponding adjustment to the size of the OSD status window
4 Each icon represents a Level 1 function. In addition to Level 1, the OSD structure includes Level 2 (a subset of level 1),
Level 3 (a subset of level 2), Level 4 (a subset of level 3) and Range
Operating the Seamless Switcher / Scaler
3
:
Figure 9: OSD Output Status
1
on the front panel or the OUT
17