Options; Addendum: Model Changes - ALLEN & HEATH XONE 464 User Manual

Options

The XONE:464 is designed to offer the utmost flexibility to satisfy your application without
modification.
customisation to satisfy the more specialist applications. Further information and details
are printed in the XONE:464 Service Manual or available from Allen & Heath.
This work requires access to the internal assemblies and resoldering of
circuit card links and should be carried out by competent technical personnel only.
Mono channel AUX options The pre-fade sends are set post-EQ, post-ON as
standard. Links on the mono circuit cards can be resoldered to reconfigure
pre-EQ and/or pre-ON.
Stereo channel AUX options
standard. Links on the stereo circuit cards can be resoldered to reconfigure
pre-EQ. Similarly the post-EQ cue feeds can be reconfigured pre-EQ.
Mono channel DIRECT outputs
standard. A link on each card can be resoldered to reconfigure pre-fader. The
direct out pre-fade source is the same as that configured to feed the aux sends.
EXT input level option
standard. These can be reconfigured for +4dBu operation by cutting track links
on the connector card.
MUTE switch function
reconfigured to attenuate the signal by 20dB by cutting a pair of track links on
the right master circuit card.
Remote control of the MUTE function The right master circuit card provides
solder pads to wire to the 25 pin REMOTE connector so local monitor MUTE
can be activated by an external switch.
REMOTE user connector
standard 25 pin chassis mount female D-connector for custom wiring.
SYS-LINK output
connector with circuit card. This provides access to all the console outputs and
is compatible with any Allen & Heath console already fitted with the SYS-LINK
expander system. A kit of parts is available from Allen & Heath.
Addendum: Model Changes – October 2000
There are minor changes between the original XONE:464 and the revised
model which replaces it and is referred to in this user guide. The order code
XONE2:464/ refers to the revised model.
Styling The original stainless steel finish is replaced with a new textured silver
paint. Several knob and pushbutton types have been changed to further co-
ordinate the styling. There are minor changes to the graphics.
Master Level Controls The original MIX1 and MIX2 master linear faders have
been replaced with rotary master controls.
Crossfader
original Alps version. These are not interchangeable.
Headphones Socket The front panel socket has been moved from the top to
lower right.
34
However, the following internal link options are provided to allow
The external inputs are set for –10dBV line level as
This mutes the local monitor as standard. It can be
The blanking plate can be replaced with a 25 pin D-
The new high grade Penny & Giles fader is fitted instead of the
The pre-fade sends are set post-EQ as
These are derived post channel fader as
The blanking plate may be replaced with a
XONE:464 User Guide