Usb Soundcard (User Options) - ALLEN & HEATH Xone:43C User Manual

USB SOUNDCARD — USER OPTIONS
The Xone:43C Soundcard can be reconfigured beyond the default shipping configuration. To make any
changes via the jumpers you will need to open the mixer, see Page 31 for information on how to do this.
Input Channel
USB_1
USB_2
USB_3
USB_4
USB_5
USB_6
USB_7
USB_8
Output Channel
USB_1
USB_2
USB_3
USB_4
USB_5
USB_6
USB_7
USB_8
The above table details the default USB Audio routing with Jumper Settings. To make any changes, lift (in
a pair) the jumpers from pins 1+2 to pins 2+3, this then enables the option setting.
CH1 CH2
RL RL
PIN
3
2
1
Allen & Heath
USB AUDIO ROUTING WITH JUMPER SETTINGS
Xone 43C DEFAULT
(RIAA or LINE)SND_L_1 (CN14 1+2)
(RIAA or LINE)SND_R_1 (CN15 1+2)
(RIAA or LINE)SND_L_2 (CN16 1+2)
(RIAA or LINE)SND_R_2 (CN17 1+2)
(RIAA or LINE)SND_L_3 (CN18 1+2)
(RIAA or LINE)SND_R_3 (CN19 1+2)
(RIAA or LINE)SND_L_4 (CN20 1+2)
(RIAA or LINE)SND_R_4 (CN21 1+2)
Xone 43C
USB_RTN_L_1
USB_RTN_R_1
USB_ RTN _L_2
USB_ RTN _R_2
USB_ RTN _L_3
USB_ RTN _R_3
USB_ RTN _L_4
USB_ RTN _R_4
Mixer -> Computer
Computer -> Mixer
CH3 CH4
RL RL
18
Xone 43C Jumper OPTION
REC_LEFT (CN14 2+3)
REC_RIGHT (CN15 2+3)
X_FX_L_SND (CN16 2+3)
X_FX_R_SND (CN17 2+3)
REC_LEFT (CN18 2+3)
REC_RIGHT (CN19 2+3)
X_FX_L_SND (CN20 2+3)
X_FX_R_SND (CN21 2+3)
No Option Set To
USB_RTN_L_1
USB_RTN_R_1
USB_ RTN _L_2
USB_ RTN _R_2
USB_ RTN _L_3
USB_ RTN _R_3
USB_ RTN _L_4
USB_ RTN _R_4
DEFAULT E.G.
CH3 DEFAULT CH4 DEFAULT
MODIFIED E.G.
CH3 DEFAULT CH4 OPTION
XONE:43C User Guide