Specifications - ALLEN & HEATH XONE 464 User Manual

Specifications

0dBu = 0.775 Volts rms
0dBV = 1 Volt rms
Maximum output level
Internal headroom
Peak indicators
Meters
Frequency response
Distortion
Crosstalk
Noise
MIC EIN
Residual output noise
Mix noise, ch routed
Power Supply
Internal switch mode power unit with auto sensing mains input.
MAINS IN socket
Power lead
AC mains
Consumption
Mains fuse rating
Dimensions and Weights
The connector pod can be rotated and fixed in one of two positions to allow either
desktop operation with rear facing connectors, or 19" rack mounting with underside
connectors in 10U space.
Desktop
Rack mounted
Packed
Weight
Connector Types
XLR connections are Pin 2 = hot (+) Pin 3 = cold (-) Pin 1 = GND
TRS input and output connections are Tip = hot (+) Ring = cold (-) Sleeve = GND
TRS insert connections are Tip = SEND Ring = RETURN Sleeve = GND
8
+4dBu = 1.23V rms
-10dBV = 316mV rms
XLR +26dBu into >2k ohm load
TRS jack +21dBu into >2k ohm load
RCA phono +15dBu into >10k ohm load
Channels +21dB
Mix to output +23dB
Turn on 9dB before clipping
MIX1 / MONITOR Peak reading 12 led 3 colour
+0/-1dB 20Hz to 40kHz
< 0.006% THD+noise measured at +14dBu 1kHz
< 90dB Channel shutoff measured at 1kHz
Measured rms 22Hz to 22kHz
-128dB referred to 150 ohm source
XLR -90dBu (-94dB S/N)
TRS jack -84dBu (-84dB S/N)
RCA phono -92dBu (-84dB S/N)
XLR -86dBu (-90dB S/N)
TRS jack -83dBu (-83dB S/N)
RCA phono -91dBu (-83dB S/N)
IEC 3 pin
Country dependent with moulded mains plug supplied
100 to 240V AC @ 50/60Hz
30W max
100-240V AC T500mA 20mm
Width Height
483mm (19") 192mm (7.6")
483mm (19") 444mm (17.5") 10U
590mm (23.2") 260mm (10.2")
Unpacked Packed
10kg (22lbs) 13kg (29lbs)
Depth
530mm (20.9")
135mm (5.3")
610mm (24")
XONE:464 User Guide