Intercom; Action Url; Key Event; Speed Dial - Snom 320 System User's Manual

=
Hide thumbs Also See for 320:
Table of Contents

Advertisement

S N O M
U S E R ' S
G U I D E

Intercom

This is programmed and managed by PLNI. PLNI does not support users programming their own
Intercom keys at this time.

Action URL

Pacific LightNet does not support Action URL features at this time.

Key Event

This is programmed and managed by Pacific LightNet. Pacific LightNet does not support users
programming their own Key Events.

Speed Dial

This key type behaves as a shortcut to dial a preset number the user calls regularly. It is designed to speed
up dialing numbers often used or hard to remember.
To program a Speed Dial Key:
1. Press the Settings Key
2. Scroll through with the left or right arrow buttons,
Behaviour is displayed. Press the F4 softkey which has the Fkeys label above it.
3. Select the number of the Programmable Key to define. Keys are numbered from top to bottom
as P1 through P6 on the left hand side and P7 through P12 on the right hand side. Once you have
selected the key you wish to program, press the
Please note that some keys cannot be changed because Pacific LightNet has configured them for
specific options such as Line keys.
4. Scroll through the different Key Types with the left or right arrow buttons,
option for Speed Dial is shown. Press the
5. Enter the number to set as Speed Dial. Numbers should be entered as they would be dialed from
the phone (eg: if you have three digit dialing enabled within your group and want to set the Speed
Dial button for one of those number you only need to put in the 3-digit extension). Press
confirm this is the number to program for Speed Dialing. You will then be redirected to the FKey
programming menu.
6. The Speed Dial key has been successfully programmed. Press
you return to the idle state. It is recommended that you test the button to make sure it functions
as expected.
.
to confirm this is the correct action to program.
21
or
until the option for Phone
to confirm this is the button to program.
to exit out of the menus until
or
until the
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents