5-4. Speedometer
ITEM
Operation Features
Tolerance
Digits range
Setting Mode
(Units Switch)
DESCRIPTIONS
OptoCoupler sensor detects the signal and then converts into a speed value.
When drive shaft runs at 2100 rpm, speedometer will display "60km/h".
+15~20%
0.0 ~ 30.0
Display Rate:0.5
+
Press
Setting-Mode, backlight illuminates in the meantime.
When 『km/h』 / 『mph』/ 『/h』are flashing, press
the unit.
for longer than 2 seconds to enter
19
to switch