Leica mojoMINI, Navigational Settings
4
Convention
Checking the signal
Maps
Navigational Settings
An instruction in the form "Tap XX)YY" means:
Tap the button labelled XX, and then tap the button labelled YY when it appears in a
pop–up or new screen.
To check the GPS signal data, tap NavSet)Signal.
The GPS Signal screen displays:
•
whether or not a GPS signal is available,
•
the number of satellites in view,
•
the current latitude (southern latitudes are shown as negative),
•
longitude (positive numbers indicate east of Greenwich and negative numbers
indicate west).
•
the speed of the vehicle, and
•
altitude above sea level.
To display map information, tap NavSet)Maps.
The Select Map screen shows the name of the current map. If you have more than
one map installed, you may change the map. Click OK after you have selected another
map.
30