Leica mojoMINI, System Installation
2.3
mojoMINI installa-
tion
Installing the mojoMINI
The mounting bracket for the mojoMINI is held in place on the windscreen of the
tractor or road vehicle by a suction cup.
4
8
mojoMINI_007
1. Slide the mounting cradle onto the end of the mounting bracket.
2. Set the bottom edge of the mojoMINI unit onto the mounting cradle.
3. Push the top edge of the mojoMINI under the clip at the top of the mounting
cradle.
4. Clean the area of the windshield where the suction cup will be placed.
5. Lift the suction cup lever, and press the suction cap to the windshield.
6. Push down the suction cup lever, to attach the cup firmly to the windshield.
7. Rotate the unit until the screen is comfortably visible.
8. Insert the SD card into the slot at the right of the mojoMINI.
1
6
20
3
2