Installing The Geospective Smart Antenna - Leica MojoMINI User Manual

Leica mojoMINI, System Installation
2.2
Equipment
required
Warning
Mounting require-
ments

Installing the GeoSpective Smart Antenna

The GeoSpective smart antenna is a high–performance GPS receiver, which is used in
conjunction with the mojoMINI.
For installation and setup, you will need:
• the GeoSpective smart antenna;
• alcohol wipes;
• adhesive strips;
• a GeoSpective cable, to connect the GeoSpective smart antenna to the vehicle
battery.
• The GeoSpective smart antenna must be protected by a 5A fast blow fuse, or
damage to wiring may result. This damage is not covered by warranty.
• If the power supply voltage is outside the specified range, the GeoSpective smart
antenna will not operate.
• If the power supply voltage exceeds +48 V DC, then the GeoSpective smart
antenna may be permanently damaged. This damage is not covered by warranty.
• When installing the GeoSpective smart antenna, choose a location that has a
clear view of the sky, so that all satellites above the horizon can be tracked.
• Mount the GeoSpective smart antenna on a secure, stable structure where it will
not present any danger. Most installations are on the tractor cab roof.
18