Connecting The Vp-4X4K 4X4 Uxga / Audio Matrix Switcher; Connecting The Vp-4X4K Rear Panel - Kramer VP-4x4K User Manual

Connecting the VP-4x4K 4x4 UXGA / Audio Matrix Switcher

6 Connecting the VP-4x4K 4x4 UXGA / Audio Matrix Switcher
This section describes how to:
Connect the VP-4x4K rear panel (see section 6.1)
Connect a balanced/unbalanced stereo audio output (see section 6.2)
Connect the VP-4x4K to a controlling device via RS-232 (see section 6.3)
Connect several VP-4x4K machines (see section 6.4)
Connect to the ETHERNET (see section 6.5)
Set the dipswitches (see section 6.6)

6.1 Connecting the VP-4x4K Rear Panel

1
the VP-4x4K, as illustrated in the example in Figure 2, do the
To connect
2
following :
1. Connect up to four computer graphics video sources to the 15-pin HD
INPUT connectors (from INPUT 1 to INPUT 4).
2. Connect up to four unbalanced stereo audio sources (for example, the
audio source of the computer
connectors (from 1 to 4).
3. Connect the four 15-pin HD OUTPUT connectors to up to four computer
graphics video acceptors (for example, displays).
4. Connect the four AUDIO OUTPUT terminal block connectors to up to
four balanced stereo audio acceptors
amplifiers with speakers).
5. Set the dipswitches (see section 6.6).
6. As an option, you can connect a PC and/or controller to the RS-232 port
(see section 6.3), the RS-485 port (see section 6.4) and the ETHERNET
(see section 6.5).
7. Connect the power cord
1 You do not need to connect all the inputs and outputs
2 Switch OFF the power on each device before connecting it to your VP-4x4K. After connecting your VP-4x4K, switch on its
power and then switch on the power on each device
3 Alternatively, you can connect a separate audio source (as shown for input 1 in Figure 2), or no source at all
4 See section 6.2
5 We recommend that you use only the power cord that is supplied with this machine
8
3
) to the AUDIO INPUT 3.5mm mini-plug
4
(for example, balanced stereo audio
5
.
KRAMER: SIMPLE CREATIVE TECHNOLOGY