Connecting The Vp-4X4 4X4 Vga Xga Audio Matrix Switcher; Connecting The Vp-4X4 Rear Panel - Kramer VP-4x4 User Manual

Connecting the VP-4x4 4x4 VGA XGA Audio Matrix Switcher

6 Connecting the VP-4x4 4x4 VGA XGA Audio Matrix Switcher
This section describes how to:
Connect the VP-4x4 rear panel (see section 6.1)
Connect a balanced stereo audio input/output (see section 6.2)
Connect the VP-4x4 to a controlling device via RS-232 (see section 6.3)
Connect several VP-4x4 machines (see section 6.4)
Set the dipswitches (see section 6.4.1)

6.1 Connecting the VP-4x4 Rear Panel

1
the VP-4x4, as illustrated in the example in Figure 2, do the
To connect
2
following :
1. Connect up to four VGA/XGA computer graphics sources to the HD15F
INPUT connectors (from INPUT 1 to INPUT 4).
2. Connect up to four balanced
Computer's audio source
(from 1 to 4).
3. Connect the four OUTPUT connectors to up to four VGA/XGA video
acceptors (for example, displays).
4. Connect the four AUDIO OUTPUT terminal block connectors to up to four
balanced stereo audio acceptors
amplifiers with speakers)
5. Set the dipswitches (see section 6.4.1).
6. As an option, you can connect a PC and/or controller to the RS-232 port (see
section 6.3) and the RS-485 port (see section 6.4)
7. Connect the power cord
1 You do not need to connect all inputs and outputs
2 Switch OFF the power on each device before connecting it to your VP-4x4. After connecting your VP-4x4, switch on its
power and then switch on the power on each device
3 See section 6.2
4 Alternatively, you can connect a separate audio source, or no source at all
5 We recommend that you use only the power cord that is supplied with this machine
8
3
stereo audio sources (for example, the
4
) to the AUDIO INPUT terminal block connectors
3
(for example, balanced stereo audio
5
.
KRAMER: SIMPLE CREATIVE TECHNOLOGY