Connecting the VS-6EII 4x4 Video Audio Matrix Switcher
#
Feature
1
POWER Switch Illuminated switch for turning the unit ON or OFF
2
INPUTS
3
OUTPUTS
#
Feature
1
AUDIO R IN RCA Connectors
2
AUDIO L IN RCA Connectors
3
AUDIO R OUT RCA Connectors
4
AUDIO L OUT RCA Connectors
5
Power Connector with Fuse
6
VIDEO OUT BNC Connectors
7
VIDEO IN BNC Connectors
5
Connecting the VS-6EII 4x4 Video Audio Matrix Switcher
To connect the VS-6EII 4x4 Video Audio Matrix Switcher, as Figure 2
illustrates, do the following
1. Connect up to 4 composite video sources
VIDEO BNC IN connectors and AUDIO L and R RCA IN connectors.
2. Connect the appropriate VIDEO BNC OUT connectors and AUDIO L and R
RCA OUT connectors to up to 4 composite video acceptors
3. Connect the power cord to the mains electricity (not illustrated Figure 2).
Figure 2: VS-6EII 4x4 Video Audio Matrix Switcher Connections
1 Switch OFF the power on each device before connecting it to your VS-6EII. After connecting your VS-6EII, switch on its
power and then switch on the power on each device
2 For example, VCR units
Table 1: Front Panel VS-6EII Features
Function
Select the video source (from A to D)
Select the video acceptor (from 1 to 4)
Table 2: Rear Panel VS-6EII Features
Function
Connects to the right audio source (A, B, C, D)
Connects to the left audio source (A, B, C, D)
Connects to the right audio acceptor (1, 2, 3, 4)
Connects to the left audio acceptor (1, 2, 3, 4)
230 VAC 50/60 Hz (115 VAC, U.S.A.) power inlet
Connects to the video acceptor (1, 2, 3, 4)
Connects to the video source (A, B, C, D)
1
:
2
(A, B, C, and D) to the appropriate
2
(1, 2, 3, and 4).
3