Encore ENXDVR-4C User Manual page 69

Load Settings from USB
USB Disk
Free Capacity
Total Capacity
Read File
This tool can help you load the system environment configuration from the USB
device.
Click [ File select] to select the file you would like to load.
LOAD SETTINGS FROM USB-FILE SELECT
 Env2010-07-14_0531.env
 Env2010-07-11_0526.env
 Env2010-07-09_0525.env
 Env2010-07-08_0504.env
Click [ Load File] to load the selected file from USB device. It will show the
following message:
Restore Default Setting
This command resets the system to its default settings.
Format USB Drive
Firmware Update
Export Event Log
Environment Setting
Save Setting to USB
Load Setting from USB
Restore Default Setting
LOAD SETTINGS FROM USB
[ Load File] [
LOAD SETTINGS FROM USB
File 'Env2010-07-14_0503.env' Loaded.
System will restart...
UTILITY/TOOLS
ENXDVR-4C User's Manual V-2
[General Flash Disk]
[905MB]
[1005MB]
[Env2010-07-14_0503]
File Select]
(Generic)
(Generic)
(Generic)
(Generic)
69