Encore ENXDVR-4C User Manual page 58

ENXDVR-4C User's Manual V-2
Management / Monitoring Setup
The Management/Monitoring Setup menu addresses the management and
monitoring service for remote DVR control and viewing from the internet (i.e.
Internet Explorer) browser and PCViewer Utility Software.
Management Service

Activate Service: Enables or disables the management service for allowing
remote control from IE or PCViewer.
Monitoring Service

Activate Service: Enables or disables the monitoring service for allowing
remote viewing from IE or PCViewer.

Port: The default port number is "8000" for DVR video and audio transmission.
The range of port numbers is from 2048 to 32767. This can also be used as the
web port.

Video Transmission Quality: Selects the remote video transmission quality
from Lowest, Low, Standard, High, and Highest.

Audio Transmission: Enables [
UPNP
UPnP allows devices to automatically establish functional connections with other
devices when connected to a network.

Activate Client: Enables or disables the UPnP connection of the DVR

Port: Specifies the streaming port for UPnP. This is typically an unused port.
NOTE
58
MANAGEMENT/MONITORING SETUP
Management Service
Activate Service
Monitoring Service
Activate Service
Port
Video Transmission Quality
Audio Transmission
UPNP
Activate Client
Port
You must have a running network in your premises if you plan to
have your surveillance systems accessible to remote users.
Consult your MIS or Network Administrator for your router's setup
of the IP address segment and port-forwarding rule for the DVR
network setup.
[ Enable]
[ Enable]
[8000]
[Standard]
[ ON]
[ Disable]
[8000]
ON] or disables [ OFF] audio transmission.