1. Manuals
  2. Brands
  3. Encore Manuals
  4. Security Camera
  5. ENXDVR-4C
  6. User manual

Encore ENXDVR-4C User Manual

Digital surveillance in a box 4-channel digital video recorder with four ccd security cameras
Hide thumbs Also See for ENXDVR-4C:
Table of Contents

Advertisement

Quick Links

Download this manual
ENXDVR-4C
Digital Surveillance in a Box
4-Channel Digital Video Recorder
With Four CCD Security Cameras
User's Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENXDVR-4C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Encore ENXDVR-4C

Summary of Contents for Encore ENXDVR-4C

  • Page 1 ENXDVR-4C Digital Surveillance in a Box 4-Channel Digital Video Recorder With Four CCD Security Cameras User’s Manual...

  • Page 2: Enxdvr-4C User's Manual V

    Users of the system are responsible for checking and complying with all federal, state, and local laws and statutes concerning the monitoring and recording of video and audio signals. Encore Electronics Inc. shall not be held responsible for the use of this system in violation of current laws and statutes.

  • Page 3: Table Of Contents

    ENXDVR-4C User’s Manual V-2 Table of Contents Table of Contents......................3 Overview ..........................6 Package Contents ......................7 Bundled Cameras ......................8 Remote Control .........................10 Front and Rear Panel of the DVR Box................11 Getting Started ........................13 Hard Drive Installation Steps ....................14 Power-on the ENXDVR-4C ....................16 Home Screen ........................17...
  • Page 4 ENXDVR-4C User’s Manual V-2 Hardware Setup ........................54 Query Error Message ....................54 Hard Drive Setup ......................55 Network Setup ......................56 Keyboard/PTZ Setup (Optional) ...................61 Screen Setup ........................63 Audio Setup ........................65 Utility/Tools ........................66 Format USB Flash Drive ....................66 Firmware Update ......................67 Environmental Setting ....................68 Exit Main Menu ........................70...
  • Page 5 ® Install SecuViewer for Apple ..................117 ® SecuViewer for Apple Interface Overview..............118 Switching channel display ....................119 Quick Operation Guide ....................119 Connecting to the ENXDVR-4C ...................120 ® SecuViewer for Android Mobile Devices.................122 ® Install SecuViewer for Android ..................122 ® SecuViewer for Android Interface Overview ..............123...

  • Page 6: Overview

    ENXDVR-4C User’s Manual V-2 Chapter Overview...

  • Page 7: Package Contents

    ENXDVR-4C User’s Manual V-2 Package Contents Please check all the contents prior to installations. If any of these contents are missing, please contact the store where you purchase this product. ENXDVR-4C Kit package contains the following:  Encore Surveillance DVR Box ...

  • Page 8: Bundled Cameras

    Bundled Cameras  ENXDVR-4C kit comes bundled with four Encore brand high quality CCD with 24 LED infra-red cameras. They come with RJ45 connector, no need for an adapter to connect to the DVR’s Video-In ports. These cameras are equipped with 24 LED IR’s for clear and crisp night vision videos.
  • Page 9 ENXDVR-4C User’s Manual V-2 SPECIFICATION VALUE Image Sensor 1/4" Sharp CCD Total Pixels PAL - 512(H) x 582(V) / NTSC 512(H) x 492(V) Sensing Area 2.7mm x 3.6mm Lens 3.6 mm M12 Lens (Optional) Scanning System 2:1 Interlaced Sync. System...

  • Page 10: Remote Control

    ENXDVR-4C User’s Manual V-2 Remote Control Button / Name Function in DVR Mode Start or stop recording / backup.  DVR Switch to DVR mode  PTZ Switch to PTZ mode  REW Rewind through video  STOP Stop playback or backup...

  • Page 11: Front And Rear Panel Of The Dvr Box

    Indicates hard drive is in use Blinking Red light Rear Panel Ports For USB flash drive only for backup and Firmware upgrades Not included in the ENXDVR-4C kit package Label Function DC IN 12V DC power port for the power adaptor...
  • Page 12 ENXDVR-4C User’s Manual V-2...

  • Page 13: Getting Started

    ENXDVR-4C User’s Manual V-2 Chapter Getting Started...

  • Page 14: Hard Drive Installation Steps

    ENXDVR-4C User’s Manual V-2 Hard Drive Installation Steps Install the 2.5” SATA hard drive by following steps Step 1 Using a Philips screw driver, remove all the screws that secure the DVR cover. Two screws in the back of the DVR box as shown in the picture and four screws in the bottom of the DVR not shown in the pictures.
  • Page 15 ENXDVR-4C User’s Manual V-2 Step 4 Remember to connect the hard disk data cable and power cable to the DVR board. Step 5 Connect the other end of the hard disk data and power cables to the hard disk itself. Secure the bracket on to its mount.

  • Page 16: Power-On The Enxdvr-4C

    Plug-in the power-plug to the power port and then plug the power cord to the electrical outlet. The ENXDVR-4C has no power switch, therefore as soon as you plugged-in the adapter to the electrical outlet, the DVR will start its operation. It may take a few seconds for the DVR to fully startup.

  • Page 17: Home Screen

    ENXDVR-4C User’s Manual V-2 Home Screen The Home Screen is the starting point for many functions and applications. It allows you to setup, access, and control the surveillance video data. You may think of this screen as a vantage point to give you instant access to video information and DVR functions.

  • Page 18: The Control Bar

    ENXDVR-4C User’s Manual V-2 Icon Function Function Camera is working No signal from camera Recording Recording Stop Force Record Start Network connected USB disk connected Network disconnected Hard drive overwrite enabled Hard drive status Channel display rotation enabled Percentage of hard drive already used...

  • Page 19: Drag-And-Drop Channel Swap

    ENXDVR-4C User’s Manual V-2 NOTE The Force Record function allows the user to bypass the current recording mode setting and to immediately start recording videos right then. The DVR will revert to its previously set mode once the forced recording feature is deactivated.

  • Page 20: Main Menu

    Encore does not keep user’s password. Example: Go to “Authentication Setup” button , click on “Create” to create a new account and name it admin2 or your preferred name, etc.
  • Page 21 ENXDVR-4C User’s Manual V-2 Main Menu Guideline Icon Name Function Opens menu to reboot or shutdown the DVR DVR Power Supply system Set the channel display, record, channel name Channel Setup and video color adjustment. Set the record schedule, video performance...

  • Page 22: Channel Setup

    ENXDVR-4C User’s Manual V-2 Channel Setup Click the “Channel Setup” on the Main Menu. The screen will display the menu shown in the following illustration. CHANNEL SETUP Channel Number Basic Setting Standard Color Adjustment Special Color Adjustment Operation Icons Click on the icon to expand the menu and view its contents.

  • Page 23: Record Channel

    ENXDVR-4C User’s Manual V-2 “OFF”- Disables selected channel. The channel number icon turns to gray. Record Channel This parameter sets one channel or all of the channels to record videos. An active channel will be displayed on screen even when it is not recording.

  • Page 24: Standard Color Adjustment

    ENXDVR-4C User’s Manual V-2 Select the icons “ ” ~ “ ” to individually set the image position of each Step 1 channel. The following figure (for 4Ch) will appear when you enter the “Image Step 2 Position Adjustment”: 1% 2011/06/06 15:37:47...

  • Page 25: Special Color Adjustment

    ENXDVR-4C User’s Manual V-2  Contrast: Default is 10. Press the button “◄ / ►” to adjust the contrast from 1 to 20.  Hue: Default is 16 Press the button “◄ / ►” to adjust the hue from 1 to 32.

  • Page 26: Record Setup

    ENXDVR-4C User’s Manual V-2 Record Setup Click “Record Setup” on the Main Menu. RECORD SETUP ◄30Sec► Auto Record Activate Performance Gains [ Enable ] Record Schedule Total Power : 480/480 (Power/Sec) Auto Settings Adjustment Channel Recording Setup Channel Number Record Resolution...
  • Page 27 This is an optional feature only for DVR unit that supports “Sensor”. When this is set to a non supported DVR (ex: ENXDVR-4C) only the Motion will work. NOTE When “Motion Mode” is set for the recording schedule.
  • Page 28 ENXDVR-4C User’s Manual V-2 RECORD SCHEDULE Channel Number None Time Motion Sensor Motion+Sensor Day\Hour Sunday Monday Tuesday Wednesday Thursday Friday Saturday Press the icon “ ” (located after the name of each day) to set every hour of an entire day to operate in the same mode.

  • Page 29: Total Power

    ENXDVR-4C User’s Manual V-2 RECORD SCHEDULE Channel Number None Time Motion Sensor Motion+Sensor Day\Hour Sunday Monday Tuesday Wednesday Thursday Friday Saturday You can also specifically set the recording mode for a particular time and day. The following example shows that on Sunday, from 19:00 to 24:00 (7:00pm to 12:00mn), and on Friday, from 2:00 to 4:00 (2:00am to 4:00am), are set to the “Time”...
  • Page 30 ENXDVR-4C User’s Manual V-2 The Total Power for 4Ch is 240/240 (Power / Sec) NTSC. For PAL, the Total Power for 4Ch is 200/200 (Power / Sec) RECORD SETUP ◄30Sec► Auto Record Active Performance Gains [ Enable] Record Schedule Total Power: 240/240 (Power / Sec)

  • Page 31: Auto Settings Adjustment

    ENXDVR-4C User’s Manual V-2 Auto Settings Adjustment This function can automatically allocate the recording power under the selected record resolution. When all the channels are set at the same resolution, the “Auto Settings Adjustment” can automatically allocate the frame rate to every channel.

  • Page 32: Detector Setup

    This function can apply for one or all channels. Detector Setup Click “Detector Setup” on the Main Menu. (For ENXDVR-4C model, the ALARM is disabled, only the Buzzer and Buzzer-Short can be use) DETECTOR SETUP...

  • Page 33: Alarm Setup (Optional)

    Alarm Setup (Optional) Alarm Setup is accessed to configure the alarm mode of each channel, individually, or for all channels, simultaneously. NOTE: ENXDVR-4C only works on Buzzer and not on Alarm even though you may see Alarm in the selection. DETECTOR SETUP...

  • Page 34: Video Loss Alarm

    ENXDVR-4C User’s Manual V-2 Blind Detect Mode This mode will be triggered when there is no video input (in total darkness) whether the security camera is purposely covered or blocked or there is a direct exposure to intense light. This detects if there is a deliberate attempt to hide the view of the camera.

  • Page 35: Motion Setup

    ENXDVR-4C User’s Manual V-2 Motion Setup Motion Setup is accessed to configure the motion mode for the DVR channels. DETECTOR SETUP Channel Number Alarm Setup Motion Setup Record Detection Activate [ Enable] Motion Mode [Sensitivity Normal] Record Time [10Sec] Alarm Mode...

  • Page 36: Record Time

    ENXDVR-4C User’s Manual V-2 1% 2010/06/06 15:37:47 Blinking Motion Icon Time Recording [“Motion Record Detection Mode Icon Activate” is enabled] Disable: Deactivates motion-triggered detection even when DVR is in a different recording mode NOTE Remember to specify the area you would like monitor using the “Motion Area Setup”...

  • Page 37: Alarm Mode

    ENXDVR-4C User’s Manual V-2 Alarm Mode NOTE: Alarm-Short / Alarm-Long modes are not supported in ENXDVR-4C units though this may appear in the selection menu. Select the alarm mode when Motion Mode is triggered. Mute: No beep whatever motion is detected or not.
  • Page 38 ENXDVR-4C User’s Manual V-2 MOTION SETUP █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █ █...

  • Page 39: Sensor Setup (Optional)

    ENXDVR-4C User’s Manual V-2 Sensor Setup (Optional) NOTE Sensor function is not included in the ENXDVR-4C unit model. Any functions that follow the Sensor or correlates with the Sensor functionality are also disabled. Sensor Setup is accessed to configure the sensor mode for each channel or all channels.

  • Page 40: Sensor Mode

    ENXDVR-4C User’s Manual V-2 1% 2010/06/06 15:37:47 Time Recording Mode Icon Blinking Sensor Icon [“Sensor Record Detection Activate” is enabled and the sensor has been triggered] Disable: Deactivates sensor-triggered detection even when DVR is in a different recording mode (i.e. Time Recording Mode)
  • Page 41 ENXDVR-4C User’s Manual V-2 DETECTOR SETUP Channel Number Alarm Setup Motion Setup Sensor Setup Record Detection Activate [ Enable] Sensor Mode [ Disable] Sensor Device Setup Record Time [15Sec] Alarm Mode [Mute] Alarm Time [10Sec] Trigger Full Screen [ OFF]...
  • Page 42 ENXDVR-4C User’s Manual V-2 Alarm Mode NOTE Alarm function is not included in the ENXDVR-4C unit model. Any functions that follow the Alarm or correlates with the Alarm functionality are also disabled. Select the alarm mode when Sensor Mode is triggered.

  • Page 43: Authentication Setup

    Authentication Setup Authentication Setup is to manage the authorization of user accounts, passwords, and permissions. Encore strongly suggests creating a backup “admin” account with password that is easy to remember. This is also true when you change the password of the built-in “admin” user account and forgot or when its admin rights were removed accidentally.
  • Page 44 ENXDVR-4C User’s Manual V-2 Click “[ Option] for expiration date setup AUTHENTICATION SETUP Account ID Passwd Expiration Date admin Never Expires ＊＊＊＊＊＊ power Never Expires ＊＊＊＊＊＊ police Never Expires ＊＊＊＊＊＊ guest ＊＊＊＊＊＊ 2010/6/12 17:04:08 Option] Create] Delete] Click the icons for setting:...

  • Page 45: System Setup

    ENXDVR-4C User’s Manual V-2 Click the icons for setting: : Allows the user to monitor audio recording from the channels : Does not allow the user to monitor audio recording from the channels NOTE Disabling all accounts means that access is available to all users without a password.

  • Page 46: Language Selection

    ENXDVR-4C User’s Manual V-2 Language Selection Language Selection is used to select the language for the on-screen display (OSD) Menu. LANGUAGE SELECTION  ‫ال ع ر ب ية‬  English  中 文  Ε λ λ η ν ι κ ά...

  • Page 47: Error Message

    ENXDVR-4C User’s Manual V-2 Channel Dynamic Effect Enables or disables the channel moving effects during channel dynamic drag and drop. Menu Dynamic Effects This pertains to the setting for the sub-menu to scroll in (when the icon is clicked) or scroll out (when the icon is clicked).

  • Page 48: Channel Information

    ENXDVR-4C User’s Manual V-2 1% 2010/06/06 15:37:47 Status Bar Channel Information Enable or disable the channel information icons is set and shown on the home screen. VIEW SETUP System Display Setup State Bar Information Channel Information All Channels Information [ ON]...

  • Page 49: Date/Time Setup

    ENXDVR-4C User’s Manual V-2 1% 2010/06/06 15:37:47 Channel Information (4Ch)): The Channel Number Icon : Recording Light : Video Loss (Flashing) : Record Mode (Not Flashing. Some DVR don’t have the sensor mode icon) : Detection Mode (Flashing. Some DVR don’t have the sensor mode icon) Date/Time Setup Date/Time Setup Menu sets relevant information on date and time.

  • Page 50: Time Set

    ENXDVR-4C User’s Manual V-2 Time Set “Time Set” is for adjusting the date and time. Time Set [ 2011/06/14 11:28:22] Time Zone “Time Zone” is for adjusting time zone and location. Daylight Saving Time “Daylight Saving Time” is for adjusting the DST settings (for countries where it is applicable).

  • Page 51: Sequence Setup

    ENXDVR-4C User’s Manual V-2 DAY/TIME SETUP Date Display Mode [YYYY/MM/DD] Time Set [2010/06/14 11:18:19] Time Zone [GMT +08:00] [Taipei] Daylight Saving Time Active Daylight Saving [ Disable] Time Starts [Not definition] Time Ends [Not definition] NTP Server Activate Service [ Enable] Server IP [time.stdtime.gov.tw]...
  • Page 52 ENXDVR-4C User’s Manual V-2 SEQUENCE SETUP Auto Sequence [ OFF ] Full Screen Sequence [ ON] ▐▬▬▬▬▬ [ OFF] 4 Split Sequence ▐▬▬▬▬▬ [ OFF] 1+5 Split Sequence Auto Sequence Enables automatic activation of sequence viewing within 10 sec, 20 sec, 30 sec, 40 sec, 50 sec or 60 sec.

  • Page 53: Button Beep Setup

    ENXDVR-4C User’s Manual V-2 NOTE A quick way to determine if the display is in sequence mode is by checking if the (Channel Rotation indicator) icon appears on the State bar. Button Beep Setup The Button Beep Setup configures the type of beeping sound for the mouse, keypad, and IR remote operations.

  • Page 54: Hardware Setup

    ENXDVR-4C User’s Manual V-2 Hardware Setup Hardware Setup is the menu for configuring hardware parameters including error message, hard drive, network, keyboard/PTZ (optional), screen display and audio function. or “Hardware Setup ” on the Main Menu. Click on the Hardware Setup icon...

  • Page 55: Hard Drive Setup

    ENXDVR-4C User’s Manual V-2 Hard Drive Setup The Hard Drive Setup menu displays hard disk information and allows the user to enable the HDD overwriting. HARD DRIVE SETUP Overwrite Enable [ YES] ▐▬▬▬▬▬ [ None] Max. Recording Days First Hard Disk...

  • Page 56: Network Setup

    ENXDVR-4C User’s Manual V-2  Standard Record Size: The total hard drive capacity in megabyte (MB) and the ratio of using space.  Standard Number of event: Total number of record events / total capacity of events and the ratio of using space.
  • Page 57 ENXDVR-4C User’s Manual V-2 IP Address Setup The IP address acts as a locator or an identification number to enable a device on a TCP/IP network to locate other devices and interact with them. Certain parameters need to be set through IP Address Setup to ensure proper network communication.
  • Page 58 ENXDVR-4C User’s Manual V-2 Management / Monitoring Setup The Management/Monitoring Setup menu addresses the management and monitoring service for remote DVR control and viewing from the internet (i.e. Internet Explorer) browser and PCViewer Utility Software. MANAGEMENT/MONITORING SETUP Management Service Activate Service...
  • Page 59 ENXDVR-4C User’s Manual V-2 Server Setup Configure the DNS server. SERVER SETUP Default DNS Address 8. 8. Custom DNS Address [168. 95. Dynamic DNS Activate Service [ Disable] Provider [www.dyndns.com] Server Name [No Definition] Account [No Definition] Password [No Definition]...
  • Page 60 ENXDVR-4C User’s Manual V-2 E-Mail Setup E-MAIL SETUP Activate Service [ Enable ] SMTP Server [ No Definition ] SMTP Port [25] Sender E-Mail [ No Definition ] Receiver E-Mail [ No Definition ] Email Authentication [ NO] Authen User Name...

  • Page 61: Keyboard/Ptz Setup (Optional)

    ENXDVR-4C User’s Manual V-2 Keyboard/PTZ Setup (Optional) NOTE Though this option appears in the Utility Software Menu and in this manual, your DVR unit’s hardware may not support this function. If your DVR unit does not have a PTZ port in the rear panel of the DVR (RS-485), your DVR unit does not support PTZ functions.
  • Page 62 ENXDVR-4C User’s Manual V-2 Channel Number The “PAN/TILT/ZOOM SETUP” supports individually setup of each channel. Select the icons “ ” ~ “ ” (for 4Ch), “ ” ~ “ ” (for 8Ch) or “ ” ~ “ ” (for 16Ch) to individually setup of each channel.

  • Page 63: Screen Setup

    ENXDVR-4C User’s Manual V-2 Databit Select a data bit communication protocol: 8-bit or 7-bit Parity Select a parity configuration: Odd, Even, or No Parity Stopbit Select a stop bit configuration: 1 Stopbit or 2 Stopbit NOTE Pan/Tilt/Zoom and RS-485 Settings may vary for each camera.
  • Page 64 ENXDVR-4C User’s Manual V-2 Screen Border 1% 2010/06/06 15:37:47 Screen Border [ ON] : To show the border [ OFF] : Not to show the screen border. Main Display Screen Provides options to connect the main display screen to either a BNC or VGA port (Labeled as “VIDEO-OUT”).

  • Page 65: Audio Setup

    ENXDVR-4C User’s Manual V-2 1% 2010/06/06 15:37:47 VIDEO ADJUSTMENT Default ] Adjust the image position by using the mouse left-click button to follow the direction change of cursor icon  up /  down /  right/  left. Press [ Default] to load the default location.

  • Page 66: Utility/Tools

    ENXDVR-4C User’s Manual V-2 Utility/Tools These tools help you to format the USB stick drive, to update firmware, to export event logs and to load or restore the environment configuration. or “Utility/Tools ” on the Main Menu. Click on the Utility/Tools icon...

  • Page 67: Firmware Update

    ENXDVR-4C User’s Manual V-2 Firmware Update The firmware is updated by using USB pen drive that contains the latest firmware file. Attach the external USB disk into the USB port on DVR front panel. NOTE Please refer to your Hardware Installation and Operation Manual to locate this USB port as it may vary for each DVR.

  • Page 68: Environmental Setting

    ENXDVR-4C User’s Manual V-2 When the DVR is updating the firmware, a status bar will appear at the bottom. After firmware update is completed, Firmware update completed. System will restart is displayed, and then the system restarts. FIRMWARE UPDATE FIRMWARE UPDATE Current Revision: V15.0.0...
  • Page 69 ENXDVR-4C User’s Manual V-2 Load Settings from USB LOAD SETTINGS FROM USB USB Disk [General Flash Disk] Free Capacity [905MB] Total Capacity [1005MB] Read File [Env2010-07-14_0503] Load File] [ File Select] This tool can help you load the system environment configuration from the USB device.

  • Page 70: Exit Main Menu

    ENXDVR-4C User’s Manual V-2 Load default setting Restore default settings? YES] [ Select “YES” to load the default setting. After which, the system will reboot. Reset completed, System will restart… Exit Main Menu The Exit Main Menu window provides options to save or discard changes before exiting.

  • Page 71: Exit & Save Changes

    ENXDVR-4C User’s Manual V-2 Exit & Save Changes All changes are saved before exiting from the menu. Data Saving Please Wait… Exit & Discard Changes All changes are ignored (The changes will not be saved and will take no effect.) before exiting from the menu.

  • Page 72: Playback And Data Backup

    Chapter Playback and Data Backup...

  • Page 73: Calendar Menu

    ENXDVR-4C User’s Manual V-2 Calendar Menu The Calendar Menu is a play back feature that allows you to access recorded videos by selecting the date and time when the video was captured. Press the Calendar Menu Icon on the Control Bar to enter the Calendar Menu in the active viewing window.

  • Page 74: Play Menu

    ENXDVR-4C User’s Manual V-2 Example of time-search video selection with Calendar Menu CALENDAR MENU [2010] [July] 9 10 11 12 13 14 15 16 19 20 21 22 23 Play] Backup] In the example above, the date selected is July 26, 2010 (Monday) and the time is 17:00.
  • Page 75 ENXDVR-4C User’s Manual V-2  Channel Number: select the channel to playback  Play Begin Time: specify the beginning of the playback  Play End Time: specify the end time of the playback The information below it shows the available recorded events.

  • Page 76: Event Search

    ENXDVR-4C User’s Manual V-2  : The recorded video data has been played : Power ON/OFF event occur  Recording Time: The date / time of recorded data  Searching: The vertical scroll bar for search the recorded data by mouse Video Playback Control Bar You will see the control bar during video playback.
  • Page 77 ENXDVR-4C User’s Manual V-2 SEARCH MENU Channel Number Filter Type [All Events] Filter Time Setup Disable] ▲  2121 ▲ ▲ 2010/07/14 06:18:31 2120 2010/07/14 06:17:12 2119 2010/07/14 05:57:38 2118 2010/07/14 04:20:11 2117 ▼ ▼ 2010/07/14 02:18:42  Option] Play] Backup] ...

  • Page 78: Data Backup

    ENXDVR-4C User’s Manual V-2 SEARCH MENU Event Name: Time Record Trigger Channel: Record End Time: 2010/07/14 06:20:31 ▲  2121 ▲ ▲ 2010/07/14 06:18:31 2120 2010/07/14 06:17:12 2119 2010/07/14 05:57:38 2118 2010/07/14 04:20:11 2117 ▼ ▼ 2010/07/14 02:18:42  Option]...
  • Page 79 ENXDVR-4C User’s Manual V-2 BACKUP MENU Backup Device [Generic Flash Disk] Free Capacity [1029352/1029380 KB] Backup Channel Estimate Time [30Sec] Start Time [2010/08/11 06:17:25] End Time [2010/08/11 06:17:31] Backup Period [00Min 06Sec] Backup Size [1152KB]   Backup Start] Disk information is shown on the top portion of the screen and recorded data information is shown in the bottom portion.

  • Page 80: Pc Player

    ENXDVR-4C User’s Manual V-2 BACKUP MENU Backup Device [Generic Flash Disk] Free Capacity [1029352/1029380 KB] Backup Channel Estimate Time [30Sec]   End Time [2010/08/11 06:18:31]    Backup Start] You can also use the scroll bar to adjust the length of the video you would like to store in a file as backup.
  • Page 81 ENXDVR-4C User’s Manual V-2 The primary window for the player appears as follows: The following table shows the function of each button: Icon Name Function Browse and open for a PVF file to view Open Plays backward 8 times or 16 times faster...
  • Page 82 ENXDVR-4C User’s Manual V-2 The Scroll Bar allows you to navigate through the length of the video by simply dragging it across. The Volume Control Bar allows you to control the volume of the sound coming from the player. NOTE 9-Split View is available only for DVRs with more than 8 channels and 16-Split View is available only for DVRs with 16 channels.

  • Page 83: System Information

    Chapter System Information...

  • Page 84: Record Information

    ENXDVR-4C User’s Manual V-2 Record Information The “Record Information” menu displays the current states of the DVR system. On your Control Bar, locate and click on the icon. The Record Information will appear as follows: RECORD INFORMATION Record Information Parameters...

  • Page 85: Hard Drive Information

    ENXDVR-4C User’s Manual V-2 Hard Drive Information The Hard Drive Setup menu displays the hard drive status. On your Control Bar, locate and click on the icon. HARD DRIVE INFORMATION First Hard Disk Model [WDC WD7500AYPS-01ZKB] HDD Size [715403 MB] Max.

  • Page 86: Network Information

    ENXDVR-4C User’s Manual V-2 Network Information Network Information displays the current state of network connections. On your Control Bar, locate and click on the Network Information icon NETWORK INFORMATION IP Type [DHCP] IP Address [192.168. 11.198] IP Status [ Connected]...

  • Page 87: Network Connectivity

    Chapter Network Connectivity...

  • Page 88: Pc Connection Through Lan

    ENXDVR-4C User’s Manual V-2 PC Connection through LAN The following is a general example that shows how to find the basic network information from the local area network (hub). Step 1 Search Router IP Address Enter “ipconfig” on DOS prompt and take note of the Default Gateway value.
  • Page 89 ENXDVR-4C User’s Manual V-2 Step 4 Setup DVR IP Address When you find a usable IP address, go back to DVR Network Setup menu to enter IP address.  IP ADDRESS: Enter the DVR’s address  GATEWAY: Enter Router IP Address ...

  • Page 90: Dynamic Dns Service Overview

    ENXDVR-4C User’s Manual V-2 Dynamic DNS Service Overview DynDNS is a service that maps internet domain names to an IP address. The DynDNS works with dynamic IP address that is assigned by your ISP company server randomly. NOTE A router is needed as the interface between PC and DVR when DVR is under internal network environment or LAN.

  • Page 91: Create A Dynamic Dns Account In Dyndns.com

    ENXDVR-4C User’s Manual V-2 Create a Dynamic DNS Account in dyndns.com NOTE DynDNS.com is not a partner nor affiliated with Encore Electronics Inc. Their web site appearance may change from time to time and services may change from what is written in this manual.
  • Page 92 ENXDVR-4C User’s Manual V-2 Create an account. Fill up information on the “Create Account or log in to Step 3 continue checkout”, check mark the “Accept” button, then click “Create Account”. Step 4 Email verification. Follow instructions on the screen. You should activate your account within 48 hours, otherwise you have to start over the process again.
  • Page 93 ENXDVR-4C User’s Manual V-2 Step 5 Proceed to Checkout. At this stage you will be asked for your credit card information. When finished, the 14-day trial period will start counting. You can use this trial full PRO service for 14 days until you cancel. If you...

  • Page 94: Setup Router

    ENXDVR-4C User’s Manual V-2 Setup Router. Most of the settings for the router are identical, here are some the suggestions:  Specify DYNDNS service provider: DnyDNS.org (dynamic)  Specify DYNDNS IP by DYNDNS account (user name / password ) ...

  • Page 95: Email Notification

    ENXDVR-4C User’s Manual V-2 Email Notification When an event is recorded and the email notification feature has been activated, a message will be sent to the recipient’s email account. This message will contain details about the event. NOTE Remember to enable the email service function in the E-Mail Setup menu to receive notifications.

  • Page 96: Pcviewer

    ENXDVR-4C User’s Manual V-2 Chapter PCViewer...

  • Page 97: Pcviewer Operation

    PCViewer is a remote viewing utility software for Windows based PC. This software is free and bundled with the ENXDVR-4C V2 kit package. It can be installed to your PC computer from the setup disc that comes with the kit package. PCViewer can remote view live video streaming from your cameras or playback previously recorded videos.
  • Page 98 ENXDVR-4C User’s Manual V-2 NOTE We suggest that you run and install the DirectX software when prompted. It will provide a smoother video display of the PCViewer video on your Windows PC based the computer. Overview. The PCViewer supports remote viewing and control for a maximum of 4 remote DVR site connections.

  • Page 99: Connect Pc Client To Dvr

    ENXDVR-4C User’s Manual V-2 Connect PC Client to DVR This section describes how to manage the DVR connection window. Step 1 Click the button to open the DVR connection window. From here, the user can Add, Modify or Delete a DVR connection.

  • Page 100: Switching The Channel Displays

    ENXDVR-4C User’s Manual V-2 NOTE To modify or delete a DVR from the list, click on the DVR name and allow for the blue highlight to appear. This highlight marks the DVR you have chosen to operate on. Switching the Channel Displays The PCViewer can easily switch viewing between the digital recorders connected to it.
  • Page 101 ENXDVR-4C User’s Manual V-2 Display multiple channels viewing on one quadrant Double click on the single channel on the quadrant to view multiple channels. The screen will appear as follows: Display a single DVR connection display in full view Click on the DVR connection button on the right-hand side of the screen to display your selected DVR in full screen view.

  • Page 102: Pause Live Viewing

    ENXDVR-4C User’s Manual V-2 NOTE , and icons are for single, 4-channel, 9-channel, and 16-channel views, respectively. Pause Live Viewing Click on the “ ” icon to pause the current viewing. Capture Still Image Click on the icon to capture still image of the view that is currently displayed on the screen.

  • Page 103: Live Backup

    ENXDVR-4C User’s Manual V-2 A BMP file is automatically saved into a folder (Viewer) located in the drive you have specified: Live Backup Click on the “ ” icon for live backup. This allows you to record the video stream instantly to your PC where you are running the PCViewer Software.

  • Page 104: Remote Playback

    ENXDVR-4C User’s Manual V-2 Remote Playback Click on the icon to display the remote playback interface on your PCViewer. A selection window will allow you to select between Time Search or Event Search. Playback DVR configuration Exit application Control bar...
  • Page 105 ENXDVR-4C User’s Manual V-2 Name Function Fast Backward 2x Plays backward faster by twice the normal speed Fast Backward 1x Plays backward faster by 1x the normal speed Playback Starts the video playback Fast Forward 1x Plays forward faster by 1x the normal speed...
  • Page 106 ENXDVR-4C User’s Manual V-2 Press the “Backup” button to create a copy of the video. The succeeding Step 3 menu will require you to set the following:  Path: Click on the “Browse” button to specify the location where you would like to store the file.
  • Page 107 ENXDVR-4C User’s Manual V-2 Step 1 In the Event Search menu, you will be asked to set the following:  Event Begin Date: Select the start date for the video you would like to play back.  Event Begin Time: Select the start time for the video you would like to play back.
  • Page 108 ENXDVR-4C User’s Manual V-2 Step 4 Double-click on the video you would like to review. While in the playback screen, you may click on the icon to access the Event Search control window. Press the “Backup” button to create a copy of the video. The succeeding...

  • Page 109: Remote Dvr Configuration

    ENXDVR-4C User’s Manual V-2 Remote DVR Configuration Click the icon to display the remote configuration interface on your PCViewer. Log-in to the Remote Configuration Interface The authentication procedure for remote site access follows the DVR authentication process. Please login by using the designated user name and password. If you did not change any of these settings on your DVR, please use the default settings below.
  • Page 110 ENXDVR-4C User’s Manual V-2 Click on “PlayFile” to locate the file you would like to view. Once the file is found, the PCViewer Player will automatically display the stored video.

  • Page 111: Remote Viewers

    ENXDVR-4C User’s Manual V-2 Chapter Remote Viewers...

  • Page 112: Webviewer For Internet Explorer

    ENXDVR-4C User’s Manual V-2 ENXDVR-4C running H.264 supports remote viewing via 3G or Wi-Fi wireless connections. The DVR may be accessed through various mobile applications. These mobile applications are discussed in this chapter. Briefly, these are the:  ® WebViewer for Internet Explorer...
  • Page 113 ENXDVR-4C User’s Manual V-2 Enable ActiveX installation. You may also click on the ActiveX link on the right-hand side of the viewer (indicated below).
  • Page 114 ENXDVR-4C User’s Manual V-2 Save the ActiveX cabinet file into your preferred folder. Extract all the contents of the cabinet file into a similar location (i.e. folder). Double click on Setup to begin installation.
  • Page 115 ENXDVR-4C User’s Manual V-2 Once ActiveX is installed, you will be prompted to refresh your browser. Click OK. Enter the designated user name and password. (Enter the default username is admin and the default password is 123456 if you did not change the DVR Authentication settings.) then press the “...

  • Page 116: Switching The Channel Displays

    ENXDVR-4C User’s Manual V-2 Switching the Channel Displays Displays single channel in full view: Double click the channel to display single channel in full view. Display four, eight, or sixteen channels in full view: Double click the full view display to switch into four, eight, or sixteen channels display.

  • Page 117: Secuviewer For Apple Mobile Devices

    ENXDVR-4C User’s Manual V-2 C - provides a means to connect or disconnect from the DVR being viewed The DVR Viewer interface on the right-hand side is consistent with PC Viewer. Please refer to the PCViewer operation guide. ® SecuViewer for Apple Mobile Devices ®...

  • Page 118: Secuviewer For Apple Interface Overview

    ENXDVR-4C User’s Manual V-2 You can see the SecuViewer icon on ® the iPhone main screen. ® SecuViewer for Apple Interface Overview Connect to th St p the DV connection Switch channel button display (CH1~CH4  CH5~CH8  CH9~CH12  CH13~CH16)

  • Page 119: Switching Channel Display

    ENXDVR-4C User’s Manual V-2 Switching channel display There can only be four (4) channel buttons displayed at each time. You can use the button to switch between displays. Quick Operation Guide button opens into an operation information screen similar to the one...

  • Page 120: Connecting To The Enxdvr-4C

    ENXDVR-4C User’s Manual V-2 Connecting to the ENXDVR-4C ® Select the SecuViewer icon on iPhone main screen to start the remote monitoring. Tap on the icon to setup the DVR connection.
  • Page 121 ENXDVR-4C User’s Manual V-2 In the Setup and DVR list screen: » : Remove a DVR from the list. » : Add a new DVR to the list. » : Change the settings of the DVR. Tap on the button to configure a new DVR.

  • Page 122: Secuviewer For Android Mobile Devices

    ENXDVR-4C User’s Manual V-2 ® SecuViewer for Android Mobile Devices ® SecuViewer for Android Mobile Devices is the free application available for the ® DVR user to connect to the DVR for remote monitoring through an Android based mobile digital devices such as Android smart phones, tablet PC’s, etc.

  • Page 123: Secuviewer For Android Switching Channel Display

    ENXDVR-4C User’s Manual V-2 ® SecuViewer for Android Interface Overview Connect to the DVR Stop the DVR connection Switch channel button display (CH1~CH4  CH5~CH8  CH9~CH12  CH13~CH16) Setup the DVR connection SecuViewer operation guide Switch to split view...

  • Page 124: Quick Operation Guide

    ENXDVR-4C User’s Manual V-2 Quick Operation Guide button opens into an operation information screen similar to the one shown here: Connecting to the DVR Select the SecuViewer icon on your ® Android device main screen to start the remote monitoring.
  • Page 125 ENXDVR-4C User’s Manual V-2 Tap on the icon to setup the DVR connection. In the Setup and DVR list screen: » DELETE: Remove a DVR from the list. » ADD: Add a new DVR to the list. » EDIT: Change the settings of the...

  • Page 126: Install Secuviewer For Blackberry Os

    6.0. Step 2 Insert the Encore setup disc of the ENXDVR-4C to the CDROM drive if you have not done so. If the product installation menu screen pops up, ignore it or you can close it. You will need the files in the CD later.
  • Page 127 Step 4 where you can browse the location of the SecuViewer.alx and SecuViewer.cod are located. Locate these files in the Encore setup disc. The SecuViewer.cod file will not show on your browser screen. Click on SecuViewer.alx to select it then click “Open”.

  • Page 128: Secuviewer For Blackberry Os Interface Overview

    ENXDVR-4C User’s Manual V-2 Step 6 Disconnect your BlackBerry from the computer. From your Blackberry phone, browse through your Applications folder (OS versions 5.0 and 6.0) or your Downloads folder (OS versions 4.6). Look for the blue SecuViewer icon and run it.

  • Page 129: Version Information

    ENXDVR-4C User’s Manual V-2 Version information button displays the version of the SecuViewer for BlackBerry installed in your device Connecting to the DVR Click on the SecuViewer icon on the BlackBerry. Click on the icon to configure the DVR connection.

  • Page 130: Browser Jpeg Viewing

    ENXDVR-4C User’s Manual V-2 The add button opens to a window that allows you to configure the remote connection to a DVR. » Tag: Name given to identify the DVR. » Source IP: Enter the DVR IP Address. » Source Port: Enter the network port (default is 8000).
  • Page 131 ENXDVR-4C User’s Manual V-2 Step 9 The first channel (CH1) of the DVR will appear on the screen of the mobile device. Select the channel to be viewed, the desired resolution, and the refresh time from the drop-down menus. ...

Table of Contents