Encore ENXDVR-4C User Manual page 27

Channel Number
Select the icon " " to setup for all channels at one time.
Select the icons " " ~ " " to individually setup of each channel.
Recording Mode Select
There are five recording modes:
None: Indicates that the channel is set to not record during this duration
Time: Indicates that the channel is set to continuously record during this duration
Motion: Indicates that the channel is set to motion-triggered recording during this
duration
Sensor: (Optional) indicates that the channel is set to record when the sensor is
triggered during this duration. NOTE: This feature is not included in the 4-channel
ENXDVR-4C.
Motion plus Sensor (optional): Indicates that the channel is set to detect either
triggering events caused by motion or from the sensor. This is an optional feature only
for DVR unit that supports "Sensor". When this is set to a non supported DVR (ex:
ENXDVR-4C) only the Motion will work.
NOTE
Press the icon " " to set the recording mode globally: the whole week (7 days) and the
whole day (24 hours) are in the same mode throughout.
The following example shows that the entire week (all 7 days) and the whole day (all
24 hours) are set to the "Motion" recording mode.
Select "Motion" recording mode, press the icon " " and press """.
RECORD SCHEDULE
Channel Number
None Time Motion
Day\Hour
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
When "Motion Mode" is set for the recording schedule.
Remember to complete the "Motion Setup" at the main menu of
"Detector Setup" - otherwise it will not be able to record during the
period set on "Motion Mode".
ENXDVR-4C User's Manual V-2
Sensor Motion+Sensor
|
|
|
|
|
|
|
27