Encore ENXDVR-4C User Manual page 62

ENXDVR-4C User's Manual V-2
Channel Number
The "PAN/TILT/ZOOM SETUP" supports individually setup of each channel.
Select the icons " " ~ " " (for 4Ch), " " ~ " " (for 8Ch) or " " ~ " " (for 16Ch)
to individually setup of each channel.
PTZ Protocol
Provides options for the PTZ camera protocol: Pelco P, Pelco D, Teleview Pelco P,
Teleview Pelco D, Merit LILIN (3B), Merit LILIN (7B), HiSharp, Nicecam and Elitar.
Camera ID
Adjusts the identification number based on the local settings of your camera. This
value may be any number from 1 to 255. Use the arrows ( and ) to select.
Speed Adjustment
These pertain to the panning, tilting, and cruising speeds of your camera.

Pan Speed: can be set between 0 to 8.

Tilt Speed: can be set between 0 to 8.

Cruise Speed: can be set between 0 to 3.

Auto Pan Speed: can be set between 0 to 5.
Zoom/Focus/Iris
These pertain to the zoom, focus, and iris adjustment settings of your camera.

Zoom Speed : can be set between 0 to 3.

Focus Speed : can be set between 0 to 3.

Iris Speed : can be set between 0 to 3.

Auto Focus : can be Enabled or Disabled.

Auto Iris : can be Enabled or Disabled.
RS-485
The DVR uses the RS-485 standard for PTZ communication. The following settings must
be configured in parallel with the local settings of the camera for the system to function
properly.
Baudrate
Select a baud rate: 1200, 1800, 2400, 4800, 9600, 14400, 19200, 38400, 57600 or
115200.
62
Camera ID [ 1]