Encore ENXDVR-4C User Manual page 41

Click on a channel you would like to map with a sensor. Select whether the sensor type
is normally open or closed. It depends on the characteristics of the sensor you intend to
use.
Restore Default Setting
Channel Select
Normally – Open: The sensor type is in a normally open state.
Normally – Close: The sensor type is in a normally closed state.
Record Time
Set the recording time when the Sensor Mode is triggered.
The recording time as 5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 45sec, 60sec,
90sec, 120sec, 150sec or 180sec.
DETECTOR SETUP
Channel Number
Alarm Setup
Motion Setup
Sensor Setup
Record Detection Activate
Sensor Mode
Sensor Device Setup
Record Time
Alarm Mode
Alarm Time
Trigger Full Screen
Trigger Type
SENSOR DEVICE SETUP
ENXDVR-4C User's Manual V-2
[ Enable]
[ Disable]
[15Sec]
[Mute]
[10Sec]
[ OFF]
[Initial Trigger]
······
[ ]
41