ENXDVR-4C Digital Surveillance in a Box 4 Channel Digital Video Recorder and 4 CCD Security Cameras with Night Vision Quick Installation Guide Check all the components and parts below. If any of the parts listed below is missing, please contact the store where you bought it from. Keep the box in case of return or exchange. ● ...
NOTE: MAKE SURE POWER CABLE IS UNPLUGGED BEFORE STARTING If the Encore DVR you purchase is a “No Hard Drive included” version, start installing a hard disk drive first before proceeding. Internal Hard Disk Drive Installation Guide Remove the top housing. Unscrew four screws on the bottom Step 1 side of DVR to remove the chassis’s top housing...
Page 3
Connect the SATA cable and power cable to the main board. Step 3 Screw the top housing back to the bottom side of DVR by four Step 4 screws.
Page 4
Connecting Cameras and Other External Devices Connect all the security cameras to the RJ45 Channel ports using the included Baluns. Use an RJ45 Ethernet cable to connect Channel port to BALUNs, then connect camera to the BNC side of the BALUN. Connect a computer monitor to the VGA port.
Page 5
STEP 1: Main Menu: Pop-up the main menu. Move your mouse arrow in the lower part of the screen to bring up the menu selection bar, as seen below. 4 Split View Play menu (Playback) 9 Split View (8CH) Event search...
Page 6
Auto channel rotation Record Information (1~4CH) Start recording Hard drive Information Stop recording Network Information Enter Main menu STEP 2: Status Bar: The “Status Bar” is located on the top portion of the screen as seen below Camera on line HDD Status Hard drive will be overwritten when the Camera signal loss...
Page 7
18:25 Network User Login Time Network acting Channel Rotation Network USB disk connection STEP 3 Main Menu Screen and Selections: Press to enter the “main menu”, it will show the password input inquiry, please enter the password. The default password is “123456”. Channel Setup: To specify or select all channel for displaying and recording setup.
To enter the “Authentication Setup” Menu, from the Main Menu click on “Hardware Setup” then click on ”Authentication Setup”. Authentication Setup is for setting up the existing or creating new users and management of users for specific access rights to specific assignments.
Page 9
1. To enter the backup menu, from the Main Menu screen click on the Play Menu “ ” then enter your password if any. Click to select any previously recorded video then click on the “Backup” button located below the screen. 2.
From the Main Menu selection, press the Play icon to enter “Play menu”, enter your password if any, select previously recorded video then click the “Play” button located at the bottom of the screen. Users can also playback all channel videos after selecting the event or the by the selected time period.
Page 11
【Step 2】Event Search Enter the “Play Menu” Option: By clicking the Option button will switch to the following screen: Play button: Please select event to play back. Then click on the When the video is finished playing a check mark “ ” will show up indicating that the video has been played back already.