Encore ENXDVR-4C User Manual page 121

NOTE
Please wait for the images to load and appear as speed of
connection the DVR may vary.
ENXDVR-4C User's Manual V-2
In the Setup and DVR list screen:
»
: Remove a DVR from the
list.
»
: Add a new DVR to the list.
»
: Change the settings of the
DVR.
Tap on the button to configure a
new DVR.
»
Name: Name given to identify the
DVR.
»
Network IP Address: Enter the
DVR IP address.
»
Network Port: Enter the network
port (default is 8000).
»
User Name: Enter the user name
(default is admin).
»
Password: Enter the password
(default is 123456).
When you are done with the setup, tap
on Ok.
The DVR name will then appear on the
DVR list screen. Tap on the DVR name
to begin access.
121