Encore ENXDVR-4C User Manual page 30

ENXDVR-4C User's Manual V-2
The Total Power for 4Ch is 240/240 (Power / Sec) NTSC. For PAL, the Total Power
for 4Ch is 200/200 (Power / Sec)
To distribute the recording power into four channels, click the total power (as
indicated above).
Video Resolution, Quality and Frame Rate Setting for each channel
Resolution:
Press the button "◄ / ►" to adjust the resolution from CIF, Half D1 and D1 for
individual channel.
Quality:
Press the button "◄ / ►" to adjust the resolution from Lowest, Low, Standard, High
and Highest for individual channel.
Frame rate:
Press the button "◄ / ►" to adjust the frame rate from 0 to max value for individual
channel. The DVR will not be recording if the frame rate value is 0.
30
RECORD SETUP
Auto Record
Active Performance Gains
Record Schedule
Total Power: 240/240 (Power / Sec)
Auto Settings Adjustment
Channel Recording Setup
Channel Number
Record Resolution
Video Quality
Record Frame Rate
Record Performance Gains
RECORD SETUP
Total Power: 240/240 (Power/Sec)
Channel Select
Resolution Quality
◄Half D1► [Standard]
[ Half D1 ] [Standard]
[ Half D1 ] [Standard]
[ Half D1 ] [Standard]
◄30Sec►
[ Enable]
[ Middle Res (Half D1) ]
[Standard]
[15]
[ YES]
◄ ►
······
Framerate
[15]
[15]
[15]
[15]