1. Manuals
  2. Brands
  3. Encore Manuals
  4. Security System
  5. ENXDVR-4C
  6. User manual

Encore ENXDVR-4C User Manual

Digital surveillance in a box 4 channel digital video recorder and 4 ccd security cameras with night vision
Hide thumbs Also See for ENXDVR-4C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
ENXDVR-4C
Digital Surveillance in a Box
4 Channel Digital Video Recorder
And 4 CCD Security Cameras with Night Vision
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENXDVR-4C and is the answer not in the manual?

Questions and answers

Related Manuals for Encore ENXDVR-4C

Summary of Contents for Encore ENXDVR-4C

  • Page 1 ENXDVR-4C Digital Surveillance in a Box 4 Channel Digital Video Recorder And 4 CCD Security Cameras with Night Vision User’s Manual...
  • Page 2 To the maximum extent permitted by applicable law, under no circumstances shall Encore Electronics Inc. or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

  • Page 3: Table Of Contents

    5.4 Create DynDNS Account ..................54  5.5 Login and Host Service .................... 56  5.6 Setup Router ......................58  5.7 Setup DynDNS Setting on Encore ENXDVR-4C Surveillance DVR ......58  5.8 Set PC Client Setting ....................59  6 PC Client and PC Viewer ...................60  ...
  • Page 4 7 Secuviewer ......................81   7.1 Setup ........................82  7.2 Connecting to ENXDVR-4C Surveillance DVR ............83  7.3 Login Setup ......................86  7.4 Language ......................... 87  7.5 Help .......................... 87  7.6 Exit ........................... 87 ...

  • Page 5: Packing List

    1 x Utility CD (includes user manual and software) Caution • Make sure to unplug the power adapter of the Encore 4-Channel Surveillance DVR before opening or hooking up any components • Secure all cables and connectors before powering up the DVR •...

  • Page 6: Overview

    Chapter Overview ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 7: Introduction

    DVR designed for home and small business use. It is easy to install. With its small compact size, it’s a space saver as well. The Encore’s Surveillance in a Box provides an intuitive onscreen menu to manipulate the DVR operations according to your likes and needs, it can be set to capture exactly what is most important to you and how it should capture, like motion detection.
  • Page 8 PC Player for Data Viewer on PC. Remote login or view your cameras even you are offsite, whether you are in the office or somewhere in Europe and want to view, change settings or playback remotely, not a problem. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...

  • Page 9: Front Panel

    For the remote control infrared cable extension For video output CH1~CH4 For camera Video inputs Channel 1 to Channel 4 Power For DC12V power input For RJ45 LAN network connection ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 10: Balun Adapter (Balance-Unbalance)

    The Network cable shown above connects to the Video-In RJ45 port Channel 1 to Channel 4. Microphone requires special adapter RCA (female) to Microphone connector. Microphone only works on CH1 port. 1.5 Remote Control ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 11 No Button / Name Function in DVR Mode Start or stop recording / backup. Switch to DVR mode Not Available in ENXDVR-4C Rewind through video STOP Stop playback or backup II PAUSE Pause recording of playback Fast forward through video ►...

  • Page 12: Hardware Setup

    Chapter Hardware Setup ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 13: Internal Hard Disk Installation

    2.1 Internal Hard Disk Installation Remove the top housing. Unscrew four screws on the bottom side of Step 1 DVR to remove the chassis’s top housing Fix the HDD and Cables Step 2 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 14 Connect the SATA cable and power cable to the main board. Step 3 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 15 Screw the top housing back to the bottom side of DVR by four screws. Step 4 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 16: External Device Installation

    All devices must be connected first before turning the 4- Channel Surveillance DVR system on. The following external devices can be connected to the Encore 4 Channel Surveillance DVR. The USB connector on the rear panel is for a USB mouse.

  • Page 17: Lcd Display

    2.2.6 IR Extender The IR extender cable allows an infra red head to be placed in a location where it can be in the line-of-sight of the remote control. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 18: 0Selecting Video Format

    2.3 0Selecting Video Format The Encore Surveillance DVR can accept either PAL or NTSC video input. The correct video standard can be chosen using the jumper indicated below. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 19: Initial Setup

    Chapter Initial Setup ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 20: Initial Setup

    After proper installation, the DVR is ready to use. After turning on the system, the DVR takes a few moments to startup. The main display screen is shown after the system is ready. 3.2 Onscreen Information ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 21 4-channel split view 9-channel split view Auto channel rotation Start recording Stop recording Enter main menu Playback menu Archive menu Event search Pan/Tile/Zoom control Recording information Hard drive information Network information ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 22: Main Menu

    Hardware Setup: for updating the firmware, setting up the hard drive, display and audio • Language Selection: selects the language for the system menus • Exit Main Menu: exits the main menu ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 23: Channel Setup

    OFF – doesn’t display on screen and channel number turns to white 3.4.3 Record Channel Sets the selected channels to record or not. ON – selected channels are recorded OFF – selected channels are not recorded ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 24: Channel Name

    Contrast: Press “↵” button to change (1~20). Default is 10 • Hue: Press “↵” button to change (1~32). Default is 16 • Saturation: Press “↵” button to change (1~32). Default is 16 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 25: Record Setup

    Low – Lower quality video, but more video can fit on the hard drive • Medium – a balance between Low and High quality • High – Higher quality video, takes more hard drive space ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 26: Record Frame Rate

    3.5.3.2 Record Total Frame Rate Setup the frame rate for each channel separately. 4-channels: 60/60FPS available, 15FPS per channel as default 8-channels: 56/60FPS available, 7FPS per channel as default ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 27: Record Schedule

    Indicates to record by motion detection Select the setting you would like to apply to the time slots on the calendar. To set everything to this setting press “ ” in the top left corner. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...
  • Page 28 For example, Sunday is set to “Motion” mode and Saturday to “None Record mode” To set for the same time on everyday, click the above that time slot. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 29 Each block on the calendar can also be individually set by just clicking on it. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 30: Video Loss Alarm

    To setup alarm mode when video loss by each/all channel: “Mute”: No sounds ever. Buzzer-Short”: sounds a small beep when the video signal stops “ Buzzer-Long”: sounds a long beep when the video signal stops “ ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 31: Motion Setup

    3.6.6 Alarm Time Sets how long recording lasts after the alarm. The following options are available: 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 or 60 seconds. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...

  • Page 32: Motion Area Setup

    Select the motion detection area. This must be set for motion detection to work. If not set, no motion detection will occur. ( ), ( ), ( ), ( ) to adjust the area. Press “ ” or right-click to save. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 33: System Setup

    To set up the Password, time, date and button beep…etc. 3.7.1 Query Error Message Display logs for all error messages. ”: Show error message with time stamp. “ ”: Clear all error messages. “ ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 34 System will save all error messages, all messages will be cleared after reboot. ON” - Display the error message. “ OFF” – Does not display the error message “ ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 35 Channel Number : Recording status : Video Signal Status : Detection mode and status (Icon will blink when motion is triggered) : Alarm Active : Buzzer active ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 36 To setup the day/time. ( / ): change the number / ( / ): move selection left or right : exit 3.7.3.3 Time Zone Set the time zone where you are located. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 37 • Server IP: The IP address of NTP server • Interval (Days): Set how many days to synchronize • Synchronize Now: Select it to start Synchronizing the NTP server ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 38 (Keypad beep setting is available for the keypad equipped models) 3.7.5 Input Device Setup To setup the speed of input device: mouse, mouse repeat, keypad and IR remote as Slow, normal or fast ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 39: Hardware Setup

    : create a new account or delete account. “ ( ), ( )”: set the permissions. A “ ” indicates that user has permission. An “X” indicates that user does not have permission. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 40: Hard Drive Setup

    Record End Time: The latest day/time of hard drive recording • Standard Record Size: The recorded Capacity / Total hard drive capacity by Mega-byte. Also show up the % of how much capacity has been used. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 41 Format Hard Drive: To format the hard drive. If the system is running at recording mode, it is not permitted to format the hard drive and shows a warning. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 42: Network Setup

    Assign a communication port (a series of number). 3.8.3.6 IP Address Setup The IP address acts as a locator for one IP device to find another and interact with it. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 43 Default DNS Address: The Domain Name system (DNS) translate hostnames to IP addresses (default setting). If there is no customer DNS address setting or fail, DVR will go for Default DNS Address. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...
  • Page 44 “Provider”: The web site / IP Address of Dynamic DNS provider • “Server Name”: To define a name of Dynamic DNS • “Account”: The account name of Dynamic DNS ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 45: Screen Setup

    “ ON”: To enable the border, “X OFF”: To disable the screen border. 3.8.4.2 Video Adjustment Adjust the whole picture to right/left or up/down by pressing / ( / ) ( / ). “ ”: Set it as default location ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 46: Audio Setup

    “ ON”: the audio is played through the audio output on the DVR “X OFF”: the DVR audio output is muted 3.8.5.3 Input Volume “X OFF”: Turn off the audio input volume ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 47: Firmware Update

    The firmware is updated by putting a USB pen drive with the flash file into the USB port. Plug the USB disk into the USB port on DVR rear panel After plug in USB disk, it shows” Read file Information” on the bottom line ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 48 When DVR is updating the firmware, it shows “Firmware is updating, please wait”. After firmware update is completed, Firmware update is success, System will restart ----“ is displayed, and then the system restarts. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 49: Language Selection

    The DVR supports the following languages (default language depends on regional settings) • English • Traditional Chinese • Spanish • Portuguese 3.10 Exit Main Menu Save or discard changes before exiting. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 50 Save all changes then exits. 3.10.2 Exit & Discard Changes Exits without saving any of the changes made. Confirm with “Yes” or go back to the menu by choosing “No”. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 51: Data Backup

    Chapter Data Backup ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 52: Backing Up Data

    Hard Drive: shows the hard drive the data will be backup up to. • Backup Device: shows the USB disk for data backup. • Free Capacity: shows the amount of free space on the USB disk. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 53: Backup To Usb

    It will be showing the “Start Time” and “End Time” for the selected video recorded data. Press “ ”, it starts to backup data into USB disk. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 54: Lan & Online Viewing Setup

    Chapter LAN & Online Viewing Setup ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 55: Identify Router Ip Address

    Please enter “CMD” and then “OK” Please enter “ipconfig” on DOS prompt, and then record the Address Number of Default Gateway as shown: It is the Router’s IP Address. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 56 Finding your ENXDVR-4C Surveillance DVR IP address Because the Router IP address is 192.168.11.1 as we found out earlier, the network domain IP address would be 192.168.11.xxx (where x are variables). Generally the usable IP Address in this range would be between 192.168.11.2 ~ 192.168.11.253.

  • Page 57: Dyndns Service Overview

    DYNDNS is a service the maps internet domain names to IP address and works with dynamic IP address (assigned by ISP server). Remark: A router is needed as the interface between PC and DVR when DVR is under internal network environment. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 58: Register With Dyndns

    Click the Create Account, and then start to create your own DynDNS Account and fill out all the blanks for account’s application as following: After you click "Create Account", it shows “Account Created”. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...
  • Page 59 It needs to confirm your account within 48 hours after receiving the e-mail or it will automatically delete your account. Just click the first link to confirm the account ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...

  • Page 60: Login And Host Service

    Login to DynDNS by entering your registered username and password. You have to register to acquire username and password. Then, go to “My Service” to get a host name Double click “Add New Hostname” as following: ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 61 Specify the Hostname for DYNDNS IP which will be applied to the DVR’s DYNDNS setting. We take DVR-HOST.dyndns.biz as an example, and click “Create Host” Now, the DYNDNS service is completed. Well keep the User name, Password and Hostname ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 62: Setup Router

    • Specify one pair of connection port (control port / streaming port) , like”8841” 5.7 Setup DynDNS Setting on Encore ENXDVR-4C Surveillance DVR After completing the DYNDNS account application, go to DVR server setup menu and input the DYNDNS information for network connection.

  • Page 63: Set Pc Client Setting

    5.8 Set PC Client Setting Enter the “Option” at PC Client to setup Network Options-DYNDNS configuration. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 64: Pc Client And Pc Viewer

    Chapter PC Client and PC Viewer ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 65: Main Menu

    Play Begin Time: specify the beginning of the playback • Play End Time: specify the end time of the playback The information below it shows the available recorded events. Option: Window switching as follows ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 66 : the data can be played. (Doesn’t show if no video recording is available) • Recording Time: The date / time of recorded data. • Status : The recorded video data has been played. : Power ON/OFF event occur. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 67: Event Search

    Filter End Time: To specify the end time of event filter • Time Reset Range: To reset the event search time period according to all effective events as recorded ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 68 Event Name: show the name of the selected event • Event Type: show the event type • Triggered Channel: show the triggered channel • Record End Time: shows the recording end time. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 69: Pc Player

    If you have not done so, click to install the “PC Viewer Utility Software” icon (see picture below) to install the program and follow the on-screen instructions. At the PDr4TLG Viewer screen, click on the “Player” tab to access the “PC Player” screen. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 70 Go to PC Player Properties setting, select the Shortcut tab then choose “Advanced”. • Enable “Run as administrator”; then, press OK to complete PC player properties setting.• ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 71 Reverse Press to playback backward I Previous frame Button for one single frame backward I I Pause Pause the video playback Next Frame Button for advancing one single frame ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 72 Press the “Client” tab, then press the “ ” button located in the leftmost bottom corner of the viewer screen. At the login screen, enter your login information Select “Connect” and click the “Login” button. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 73 IP Address / Port: Enter the IP address of the ENXDVR-4C, the default IP address is set to automatic or DHCP Password: The password is the same password that be used for formatting the DVR Hard Drive. The default is “123456”.
  • Page 74 Channel Mode: To display 4 split screen Channel Mode: To display 9 split screen Channel 1display at full screen (4ch DVR) To display Channel1, channel2….. channel4 by sequencing on ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 75 SELECT Use this button to change or confirm values on main menu or sub menu setting. Mute On/Off Set Speaker On / OFF. Volume To adjust the speaker’s volume ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 76 The default path of local recording is C:\Capture, this is where all the recorded video files are saved unless the location was changed. Or you can change the path under hierarchical menu: “Option” ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...
  • Page 77 Press the right button of mouse to the “Player” tab, and then select “Open Disk”. Select the video file then, press “OK” to start playback the data in USB removable flash drive. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...
  • Page 78 ”Mark In” button. Use your mouse again to select the end point, then press ”Mark Out” Then go back to the drop down menu and select “Export”. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...

  • Page 79: Web Browser Viewer

    • Then, click “Connect” You may get some screen messages, just follow screen instructions if it happens. All the settings and the operations can be done using your mouse and buttons, ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 80 ENTER Input Confirm / change values on main /sub menu setting. MENU Enter menu or exit. Moves right / Channel change ＋ Moves left / Channel change － ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 81: Play Control

    Stop playback or backup. II PAUSE Pause recording or playback. ► PLAY Start video playback. Start or stop recording/backup. ● REC FF >> Forward search through a time-shifted or recorded video. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 82: Capturing Videos

    You can refer to http://www.free- codecs.com/download/K_Lite_Codec_Pack.htm Or Insert the ENXDVR-4C Setup Disc and click on icon as seen in the Main Menu screen below. Make sure you have internet connection because this icon will bring you to the K-Lite web site where you can download the codec to run AVI and other videos.
  • Page 83 Press “AVI” on the top to capture video that is synchronous with DVR and save as a file on PC. Before PC starting to capture video from DVR, it asks will it lower down the internet speed. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 84 When the video capture processing, the icon “AVI” will change as following: Press “AVI” again for stop/completing the video capture and save file. And icon “AVI” will back to normal. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL...

  • Page 85: Secuviewer

    Chapter Secuviewer ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 86: Setup

    7.1 Setup You can remote view the ENXDVR-4C Surveillance DVR unit through 3G application software. Be sure that the following conditions are met before starting: • Move your mouse arrow to icon from the Setup Disc Main Menu then select from child popup menu for your 3G phone –...

  • Page 87: Connecting To Enxdvr-4C Surveillance Dvr

    7.2 Connecting to ENXDVR-4C Surveillance DVR Press “DVR Connect” to start connecting your cell phone to the ENXDVR-4C Surveillance DVR. WARNING Using this service requires a 3G data connection on your phone or device. Data charges may apply. Check with your service provider before using the Secuviewer.
  • Page 88 When the keypad is locked, it shows the icon: . Screen Rotate: Rotate the canvas 90deg clockwise for a larger viewing size. Or use hotkey "#" to rotate screen Disconnect: To disconnect the mobile phone and DVR. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...
  • Page 89 [Key] - The mobile is operated by keypad, there are buttons for DVR remote control [Key]- The mobile is operated by stylus, there are buttons for DVR remote control Operating keys: ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

  • Page 90: Login Setup

    42 => 4-Split Screen 2 99 => 9-Split Screen 7.3 Login Setup To login to the ENXDVR-4C Surveillance DVR, use the same procedure when logging-in on a regular PC network connection and password (123456 default password for default user “admin”.

  • Page 91: Language

    7.4 Language Select the language of the software. 7.5 Help Provide online help and descript how to operate SecuViewer. 7.6 Exit Press “Exit” to leave the SecuViewer application. ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER’S MANUAL www.encore-usa.com...

Table of Contents