Heat & Glo Escape-42DV Owner's Manual page 34

LOG #3
(SRV2052-701):
Place log #3 onto the back of the
burner. The log sits on top of the
burner surface. The back of the
log is pushed up against the back
metal wall of the burner and the
left end of the log is flush with the
left edge of the metal wall.
LOG #4
(SRV2012-162):
Place log #4 on top of the burner in
front of log 3. The triangle shaped
groove in the bottom fits onto the
right grate tine. The right side is
pushed back until it touches the
back log. The left end of the log is
moved back until it almost covers
the burner ports behind it. Do NOT
cover the burner ports.
LOG #5
(SRV2012-163):
Place log #5 in front of log #4. The
groove in the bottom end of the log
fits into the right vertical grate tine.
The back of the log rests in the
small flat spot on top of log #3.
34
FLUSH END
Heat & Glo • Escape-42DV • 2052-900 Rev. B • 5/05