Heat & Glo Escape-42DV Owner's Manual page 33

Step 2.
Place the grate onto the burner.
The back of the right tine drops
into the hole on the right rear of
the burner. Line the grate up so
it is parallel with the front of the
firebox. Be sure to push the grate
all the way down to the floor.
LOG #1
(SRV750-706) (Three):
There are quantity three (3) of log
#1. Place one of the logs on the
floor of the fireplace on the left side
of the grate between the firebox and
the left grate tine. Place the second
log on the right side of the burner
between the burner and the right
grate tine. The second log can be
slightly resting on the edge of the
burner. Place third log on top of the
left side of the burner. The burner
ports will be around the log. Do NOT
cover any burner ports with the log.
LOG #2
(SRV569-705):
Place log #2 on the right side of
the burner on the floor. The log
will be in front of the orange
Kapton lens.
Heat & Glo • Escape-42DV • 2052-900 Rev. B • 5/05
33