Communication Slots; Connectups Web/Snmp Card (Bd Model); Relay Interface Card (Bestdock Model); Dedicated Input Signals - Eaton Powerware 9170+ User Manual

COMMUNICATION

Communication Slots

The Powerware 9170
quick installation of the optional BestDock
extend the capabilities of the Powerware 9170
compatibility with network and remote monitoring/management
systems.
ConnectUPS t Web/SNMP Card (BD Model)
The ConnectUPS-BD Web/SNMP Card provides the Powerware 9170
system with its own ethernet network connection, allowing it to be
remotely monitored and controlled via industry-standard Internet
browsers. The HTML interface enables UPS monitoring and
management from anywhere on the Internet or within your intranet. In
addition, third-party Simple Network Management Protocol (SNMP)
software packages may also be used to communicate remotely with the
Powerware 9170
The ConnectUPS-BD Web/SNMP Card also allows UPS-dependent
computer systems to automatically shut down during extended power
outages using the NetWatch client software provided on the Software
Suite CD or Web site.

Relay Interface Card (BestDock Model)

The BestDock Relay Interface Card provides true relay contact output to
peripheral devices. Outputs are user-selectable as normally open or
normally closed. Refer to the instructions included with the relay card for
more detail.

Dedicated Input Signals

Emergency Power-off: Connection to a facility Emergency Shutdown
switch provides a method for emergency Powerware 9170
shutdown. Opening this connection creates an immediate shutdown of
the Powerware 9170
Bypass: The signal from an external bypass switch, to isolate the
Powerware 9170
go into Internal Bypass mode.
92
EATON Powerware
+
UPS has two communication slots that allow
+
system.
+
UPS output.
+
system for maintenance purposes, tells the UPS to
+
®
9170 UPS (3–18 kVA) User's Guide
t
cards. These interface cards
+
system to provide
S
164201393 Rev C www.powerware.com
+
+
system