Network Difficulties - Brother DCP-6690CW User Manual

Network Difficulties

Difficulty
Cannot print over the Network.
The network scanning feature does
not work.
Your computer cannot find your
machine.
Suggestions
Make sure that your machine is powered on, is online, and in Ready mode. Print
a Network Configuration list (see Printing Reports on page 28) and check the
current Network settings printed in this list. Reconnect the LAN cable to the hub to
verify that the cabling and network connections are good. If possible, try
connecting the machine to a different port on your hub using a different cable. If
the connections are good, the machine shows LAN Active for 2 seconds.
(If you are having Network problems, see the Network User's Guide for more
information.)
®
(For Windows users only) Firewall settings on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure the
Firewall. If you are using personal Firewall software, see the User's Guide for your
software or contact the software manufacturer.
For Windows ® XP SP2 and Windows Vista ® users, see Firewall settings in the
Software User's Guide on the CD
®
For Windows XP SP1 users, please visit the Brother Solutions Center
(http://solutions.brother.com).
®
<Windows users>
Firewall settings on you PC may be rejecting the necessary network connection.
For detail, see the instruction above.
®
<Macintosh users>
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model
list in ControlCenter2.
Troubleshooting and Routine Maintenance
-
ROM.
B
77