Network Difficulties - Brother DCP-9020CDW Basic User's Manual

Network difficulties

Difficulties
Cannot print and scan over a
network after completing the
software installation.
The network scanning feature
does not work.
The Brother software cannot be
installed.
Cannot connect to the wireless
network.
106
Suggestions
When the Cannot print to the networked printer. screen appears, follow the on-
screen instructions.
If the problem is not solved, see Network User's Guide:Troubleshooting.
®
(Windows and Macintosh)
The network scanning feature may not work due to the firewall settings. Change
or disable the firewall settings. It is necessary to set the third-party
Security/Firewall Software to allow Network scanning. To add port 54925 for
Network scanning, enter the information below:

In Name: Enter any description, for example Brother NetScan.

In Port number: Enter 54925.

In Protocol: Ensure UDP is selected.
See the instruction manual that came with your third-party Security/Firewall
Software or contact the software manufacturer.
For more information, you can read FAQs and troubleshooting suggestions at
http://solutions.brother.com/.
(Macintosh)
Re-select your machine in the Device Selector window from the Model pop-up
menu in the main screen of ControlCenter2.
®
(Windows )
If the Security Software warning appears on the computer screen during the
installation, change the Security Software settings to permit the Brother product
setup program or other program to run.
(Macintosh)
If you are using a firewall function of anti-spyware or antivirus security software,
temporarily disable it and then install the Brother software.
Investigate the problem using the WLAN Report. Press
Print Reports, WLAN Report and then press OK (see Quick Setup Guide).
, All Settings,