Copy Settings; Changing Copy Speed And Quality; Enlarging Or Reducing The Image Copied - Brother DCP-6690CW User Manual

Copy settings

You can change the copy settings temporarily
for the next multiple copies.
If you have finished choosing settings, press
Mono Start or Colour Start.
You can choose the multiple settings, press
and set all the options that you like.
Note
You can save some of the settings that
you use most often by setting them as a
favourite (up to three can be saved).
These settings will stay until you change
them again. (See Setting your favourites
on page 38.)
Changing copy speed and
quality
You can choose from a range of quality. The
factory setting is Normal.
Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Press
4
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Quality.
e
Press Quality and choose Fast,
Normal or Best.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Enlarging or reducing the
image copied
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
4
the paper size you set.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display
Enlarge/Reduce.
e
Press Enlarge/Reduce.
f
Press and choose 100%, Enlarge,
Reduce, Fit to Page or
Custom (25-400%).
Making copies
(Copy).
(Copy).
4
4
31