Making N In 1 Copies Or A Poster - Brother DCP-6690CW User Manual

Chapter 4
Making N in 1 copies or a
poster (Page Layout)
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
The 1 to 2 feature copies one A3 or Ledger
size page onto two A4 or Letter size pages. If
you use this setting, use the scanner glass.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important
Make sure paper size is set to A4, A3,
Letter or Ledger.
You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
If you are producing multiple colour
copies, N in 1 copy is not available.
(P) means Portrait and (L) means
Landscape.
You can only make one poster copy and 1
to 2 copy at a time.
Note
Watermark Copy, Book Copy, Sort,
Enlarge/Reduce and
Skew Adjustment are not available with
Page Layout.
a
Press (Copy).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Page Layout.
e
Press Page Layout.
34
f
Press and choose Off(1in1),
2in1(P), 2in1(L), 4in1(P),
4in1(L), 1 to 2, Poster (2 x 2)
4
or Poster (3 x 3).
If you choose 2 in 1 or
Poster (2 x 2) with A3 or Ledger,
go to step g.
If you choose another setting, go to
step h.
g
Do one of the following:
If you choose 2in1(P) or 2in1(L),
press and choose A3x2 i A3x1,
A4x2 i A3x1, LGRx2 i LGRx1 or
LTRx2 i LGRx1.
If you choose Poster(2 x 2),
press and choose A3x1 i A3x4,
A4x1 i A3x4, LGRx1 i LGRx4 or
LTRx1 i LGRx4.
h
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step i.
i
After the machine scans the page,
press Yes to scan the next page.
j
Place the next page on the scanner
glass.
Press Mono Start or Colour Start.
Repeat steps i and j for each page of
the layout.
k
After all the pages have been scanned,
press No to finish.