Skew Adjustment; Book Copy - Brother DCP-6690CW User Manual

Chapter 4

Skew Adjustment

If your copy is scanned skewed, your
machine can correct the data automatically. If
you use this setting, use the scanner glass
and 100% copy.
a
Press (Copy).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display
Skew Adjustment.
e
Press Skew Adjustment.
f
Press Auto (or Off).
g
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
• Skew Adjustment is not available with
Page Layout, Book Copy,
Enlarge/Reduce and
Watermark Copy.
• You cannot use this setting with Ledger,
A3 or paper smaller than 64mm × 91mm.
• This setting is only available for paper that
is rectangular or square.
• Skew Adjustment is only available if the
document is skewed by less than
3.0 degrees.
• Skew Adjustment may not work
correctly if your document is too thick.
36

Book Copy

4
Book copy corrects dark borders and skew.
Your machine can correct the data
automatically or you can make specific
corrections.
If you use this setting, use the scanner glass.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Book Copy.
e
Press Book Copy.
f
Do one of the following:
If you want to correct the data
yourself, press On(Preview).
Press Mono Start or Colour Start
and go to step g.
If you want the machine to correct
the data automatically, press On and
go to step h.
g
Adjust the skewed data by using
or .
Remove the shadows by using
or .
h
If you have finished making corrections,
press Mono Start or Colour Start.
Note
Book Copy is not available with
Page Layout, Sort, Fit to Page,
Skew Adjustment or
Watermark Copy.
(Copy).
4