Creating Schedules - Videofied VIA-Pro Owner's Manual

Creating Schedules

Schedules allow you to control when
a specific access code can be used to
arm and disarm the system. A schedule
consists of a day, beginning time, and
ending time that the specific access code
can be used. Up to five schedules can be
programmed for each access code.
Use the tables on page 16-17 to fill in the
necessary schedule information for each
code. Enter this information using the
procedure below.
1. Set the system to Level 2 or 3.
2. Press the left or right arrow button
until the display shows BADGES
ACCESS CODES, then press YES.
The display shows BADGE OR CODE.
3. Enter the appropriate Level 2 or 3
access code, then press YES. The
display shows ENTER A
BADGE/CODE
Press the right arrow button once.
4.
The display shows BADGES/CODES
CONFIGURATION.
5. Press YES. The display shows the
first access code.
6. Press the left or right arrow button
until the desired code is displayed,
then press YES. The display shows
MODIF NAME BADGE/CODE.
7. Press the right arrow button twice.
The display shows SCHEDULE
AUTHORIZED.
8. Press YES. The display shows
SELECT/MODIFY SCHEDULES.
V i d e o f i e d S e c u r i t y Sy s te m O w n e r s M a n u a l
9. Press the right arrow button once.
The display shows ENTER A NEW
SCHEDULE.
10. Press YES. The display shows
BEGIN SCHEDUL 1 Mon.
11. Press either arrow button until the
desired weekday appears, then press
YES. The display shows BEGIN
SCHEDUL 1 Day= 00:00.
12. Press either arrow button until the
desired hour appears, then press
YES. The display does not change.
13. Press either arrow button until
the desired minutes appear, then
press YES. The display shows END
SCHEDUL 1 MON.
14. Press either arrow button until the
desired day appears, then press
YES.
15. Press YES. The display shows
END SCHEDUL 1 Day= 00:00.
16. Press either arrow button until the
desired hour appears, then press
YES.
17. Press either arrow button until the
desired minutes appear, then press
YES. The display shows SCHEDULE
ENTERED!, then returns to ENTER
A NEW SCHEDULE.
18. Repeat steps 10 - 17 for additional
schedule programming.
15