New Construction Installation - Bg radia BGX Owner's Manual And Setup Procedures

New Construction Installation (cont.)
4. When installing drywall, cut the opening around the
protective cover plate as shown on Fig. 5 on the left.
5. After drywall painting is completed and the system is
ready for hook up, remove the cover plate and hook up
the speaker cable to the binding posts at the bottom,
paying attention to correct polarity.
Fig. 5 Installing NCB and subwoofer module for new construction
10
775-884-1900
>
3535 Arrowhead Drive
ph · 775-884-1276 fx ·
6. Take the 7" wide grille bezel without the grille material
installed and attach it to subwoofer module as shown
in Fig. 5 on the right image. Use the same four screws
that were used to hold the protective cover plate.
7. Remove the upper plastic end cap on the bezel. Slide
the grille material into the bezel and finish by snapping
the end cap in place.
>
· Carson City, NV 89706
www.bgradia.com · sales@bgradia.com