Uniden XS9800 Owner's Manual page 6

Color profile: Disabled
Composite Default screen
DO NOT use an outlet
controlled by a wall switch.
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the
battery (refer to "Charging
the Battery Pack," page
10).
C:\Manuals 7\Exs9800\EXS9800.vp
Thu Oct 01 08:40:00 1998
4) Put the AC adapter cord inside the
molded wiring channel, then wrap it
around the strain relief notch. Plug
the AC adapter into a standard
120 VAC wall outlet.
5) Plug one end of the short telephone
cord into the
TEL LINE
the back of the base, then plug the
other end into a standard
telephone jack.
6) Line up the mounting slots on the base
with the mounting posts on the wall,
then push in and down until the
phone is firmly seated.
7) On the base unit, pull the handset
retainer out of the slot and rotate
it clockwise 180°.
jack on
5