Table of Contents
Advertisement
Color profile: Disabled
Composite
Default screen
NOTE
You must enter a command
within 15 seconds of
entering command waiting
mode or the answering
system automatically hangs
up and returns to standby.
NOTE
The system will only
playback messages for four
minutes and then it returns
to command waiting mode.
To continue playing your
messages, press #2 again
within 15 seconds.
38
C:\Manuals 7\Exs9800\EXS9800.vp
Thu Oct 01 11:22:28 1998
REMOTE ACCESS AWAY FROM HOME
You can operate your answering system from a remote location using
any touch-tone telephone. Use this function to check for recorded
messages, to play or delete messages, or even to record a new
outgoing message.
1) Call your telephone number.
2) During the outgoing message playback, press
number. Refer to page 32 for instructions on how to select a PIN code.
3) The answering system announces the time and day stamp followed by
the number of messages stored in memory. Message playback
automatically begins.
4) You may continue to listen to your messages, or you may select a
command from the following chart:
FUNCTION
Repeat
Play
Skip
Delete
Stop
Answer On
Memo Record/Stop
OGM Record/Stop
Answer Off
Room Monitor
5) After all of your messages have played, you will hear intermittent beeps
indicating that the system is in command waiting mode. You may
enter another command at this time from the chart above.
6) When you are finished, hang up to exit the system. The answering
system automatically returns to standby.
followed by your PIN
#
PRESS
#, 1
#, 2
#, 3
#, 4
#, 5
#, 6
#, 7
#, 8
#, 9
#,
*
Advertisement
Table of Contents
