Uniden XS9800 Owner's Manual page 23

Color profile: Disabled
Composite Default screen
NOTE
If you select No, then the
Caller ID screen returns.
22
C:\Manuals 7\Exs9800\EXS9800.vp
Thu Oct 01 11:20:37 1998
Calling a Caller ID number
1) Press , and the Caller ID summary
call id
screen appears. The screen shows the
number of new messages and
total messages.
2) Select the number that you would like to
dial. Press ; to scan forward through
the messages and : to scan backwards
through the list.
3) Press and the number automatically dials.
talk
Storing a Caller ID number into a memory location
1) Press , and the Caller ID summary
call id
screen appears. The screen shows the
number of new messages and
total messages.
2) Press ; or : to find the message that
you would like to store, then press
to store the selected message.
memory
3) The selected location screen appears. Use
the : and ; keys to select a blank
memory location where you would like to
store the number. (If you want to replace
an existing number with the Caller ID number, skip to step 5.)
4) Press . A confirmation tone sounds, and the number is
select
programmed. (Do not complete steps 5 and 6.)
5) If you choose to replace an existing
number with the Caller ID number, press
and the following screen appears.
select,
6) Use the : key to move the cursor to
confirmation tone sounds, and the number is programmed.
New : 01
Total : 02
12/21 12:30P 03
Smith John
817-555-1212
New : 01
Total : 02
12/21 12:30P 03
Smith John
817-555-1212
Select Location
1> JOHN SMITH
2 UNIDEN
Replace Memory?
Yes
> No
and press . A
Yes
select