Table of Contents
Advertisement
CTR's can be entered into the instrument either manually in Main Setup Menu
or with less effort by assistance of a PC-program, e.g. Flychart, this program may be
downloaded from our Internet Homepage at (www.flytec.ch).
•
Without activation the user has 20 CTR's at his disposal. One can in Basic Settings ->
Init CTR's call-up the CTR Innsbruck into the instrument and then alter it in
Main Setup Menu -> restricted areas.
•
With activation code there may be used up to 150 CTR's, depending on how complex
they are. It is necessary to activate the SW Package 02 for this purpose.
Name of CTR
personal comment
The CTR is defined by endpoints and arc segments or just by a circle. When entering these
elements it must be taken care of that the endpoints are precisely created in their order of
appearance (to the right or to the left) in which these lines should be displayed later.
The 6020-GPS instrument draws automatically a line from the recent waypoint to the first one.
It is therefore not required to repeat as last waypoint the first one.
As type the following elements can be selected:
Point:
Centre:
Startboarder:
Stopboarder:
Circle:
example
counter-clockwise
7. Point
6. Point
1. Point
Operating Manual Flytec 6020
Restricted areas
=================
CTR1 Alpnach
TMA 1 Alpnach
TMA 2 Alpnach
================⇓
CTR 1 Alpnach
Höhe FL130
No Elements:8
Ins
Ctr
endpoint
centre of arc segment
Startpoint of arc segment
endpoint of arc segment
centre of the circle plus Radius
5 Stopboarder
Dir -
3 Center
4 Startboarder
Dir -
2. Point
- 30 -
Ctr1
Del
Ctr
1. Point
2. Point
6. Point
⇒
Airspace,
Information to
number of
endpoints /
elements
CTR1 Alpnach
=================
Point
1/7
Point
2/7
Center
3/7
Startb.
4/7
Stopb.
5/7
Point 6/7
================⇓
Point
Lat
N 47'00.783
Lon
E008'17.917
Ins
Ele
Del
Ele
Advertisement
Table of Contents
