Table of Contents
Advertisement
damp
Dampening
Pit.
Beep intervall
number
30
beep tones
per second
25
20
15
10
5
0
2
⇒
Main Setup Menu
The Sink tone is continuous and is heard with deeper sound pitch at increasing sink speed
and is slowly again increasing in frequency when approaching rising air.
Starting point
⇒
Main Setup Menu
Starting point
Operating Manual Flytec 6020
The Variometer value is recalculated every 0.2s. In case of
rapid Vario changes and setting of quickly increasing tone pitch,
this may possibly result between two calculation phases in a
quite important modification of tone frequency. The ear perceives
this incidence as a kind of fast "piano effect". In order to diminish this
effect, a damping feature may be fitted. Then rapid tone pitches are
honed in the frequency. As a result, the Vario sound has a smoother
response.
See graphic
beep tone short interval=7
4
6
⇒
User Settings
Vario-Acoustics
The starting point of sink acoustics can be selected just as in
climb acoustics. The threshold can be set by use of the
arrow keys.
During flight the Sink tone can be switched-on or switched-off
by short pressure on the
switch-on the selected starting point in the analogue Vario
scale. Switch-off is just confirmed by a short beep of the key.
⇒
User Settings
Vario-Acoustics
In order to avoid the climb acoustics get started with immobile
aircraft, for ex. at take-off area, or at only slight climb, the climb
acoustics starting point can be set in the range from 0 cm/s up to
20 cm/s. Depending on the selected filter type, when climbing,
the Vario shall now activate vigorously or slowly
beep tone long interval =1
8
10
Vario
⇒
Sink tone threshold .
key. Then one can see upon
⇒
Vario Climb threshold
- 16 -
12
14
Advertisement
Table of Contents
