Testing Your Tools - Wacom Intuos 3 User Manual

Testing your tools

If your tool does not work as you expect, it is a good idea to first check the assigned functions or to reset the
tool to its default condition. A quick way to reset a tool to the default settings is to remove it from the T
list by clicking on the list's [ – ] button. After the tool has been removed, place it back onto the tablet and the
tool will be re-added to the T
Open the Wacom Tablet control panel and click on the A
the D ... button to open the D
IAGNOSE
information about the tablet hardware and pointing devices. This information is used when testing your
tablet and tools.
If you have more than one tablet connected to your system, be sure to select the tablet for which you are
testing your tool in the T
Note: When testing your tool buttons, if a button is set to P
occur when the button is pressed. In this case you may want to change that button's function before testing.
C
list with its default settings.
OOL
IAGNOSTICS
I column.
ABLET NFO
C
I
ONTENTS
NDEX
button. In the dialog box that appears, click on
BOUT
dialog box. The D
IAGNOSTICS
- M
OP UP ENU
I
ONTENTS NDEX
T
ROUBLESHOOTING
dialog box displays dynamic
or O /R ..., that function will
PEN UN
Testing the Tablet Keys
Testing the tablet Touch Strips
Testing a Pen
Testing a Mouse
57
OOL
57