Windows-Specific Problems - Wacom Intuos 3 User Manual

The computer does not go
to sleep.
When using the tablet the
screen cursor is very
erratic or jumps around.
The Intuos3 Pen does not
work on the tablet Touch
Strip.
The tablet has stopped
working. The pen no
longer turns the status
LED green, or the LED is
always green.
Windows-specific problems
Windows 98 or Me.
Your Intuos3 tools do not
function inside a full screen
DOS window.
After pressing
C +A +D , the screen
TRL LT EL
cursor cannot be controlled
with your Intuos3 tool.
After changing right- and
left- handed settings in the
computer's mouse control
panel, the pen tip no longer
functions properly and
Intuos3 Mouse tool button
functions are reversed.
Windows XP. After
installing the tablet on a
system with multiple users,
the tablet only works on
the primary user desktop.
C
ONTENTS
When you are not using your Intuos3 input tool(s), remove them from the
tablet surface or the tablet will continue to send data, keeping the computer
awake.
On rare occasions the tablet may receive interfering radio frequencies from
a computer monitor or nearby AM radio station. If you notice interference
from a monitor, try moving the tablet at least 6 inches away from the
monitor, or change the monitor refresh rate or monitor resolution.
Remember that the pen is active in a narrow band along the Touch Strip
edge closest to the tablet's active area.
Your tablet may need to be recalibrated to regain normal function. Do not
uninstall the driver or delete the tablet preferences. Contact the Wacom
support staff for the area where your product was purchased. See the
Wacom tablet Read Me file, located on your computer or on the Wacom
Tablet CD, for contact information.
You must use a traditional mouse when working in a full screen
DOS window.
When the C P
LOSE ROGRAM
tablet will not work. Use your traditional mouse or keyboard to continue.
When this dialog box is closed, you can again use your Intuos3 tool to
control the screen cursor.
This action will reverse the right and left button settings on your Wacom
tools. Restart Windows for your Wacom tool settings to be correctly
recognized.
Reboot the system after installing the tablet on a system with multiple users.
C
ONTENTS
I
NDEX
dialog box (Windows 98, or Me) is active, the
I
NDEX
T
ROUBLESHOOTING
64
64