Working With Multiple Tools - Wacom Intuos 3 User Manual

Working with multiple tools

The Wacom Tablet control panel is designed to help you customize and keep track of your Intuos3 tool
settings. The tool you use to open the control panel is automatically selected, and the appropriate tabs for
that tool are displayed.
The T list displays an
OOL
icon for the tablet
F and for each
UNCTIONS
Intuos3 tool that has been
used on the tablet.
If application-specific
settings have not been
added, the A icon is
LL
displayed and the tool
settings apply to all
applications.
Tip: You can give each tool a different name by double-clicking
on the tool's icon and entering a new name. For example,
"Drawing Pen" or "Paint Brush". You cannot rename the
F icon.
UNCTIONS
To add a tool to the control panel's T
• When a new tool is placed on the tablet for the first time, it will function with the appropriate default
settings for that tool, and not the custom settings of other tools, even if they are identical devices. If the
Wacom Tablet control panel is open, the tool is automatically added to the T
customize the tool by changing the tab settings.
• When you select a tool that you have added to the T
displayed. Any changes you make to the tab settings will then apply to that tool. Your changes take
effect immediately.
To remove a selected tool from the T
appears, click D
ELETE
custom settings you may have created for it. (A removed tool can be added back to the T
it back onto the tablet.)
Note: The F
UNCTIONS
Tab settings apply only to the
selected tool and application.
list, simply use the tool on your Intuos3 tablet.
OOL
list, click on the T
OOL
to confirm your selection. The selected tool is removed from the list, along with any
icon cannot be removed from the T
C I
ONTENTS
NDEX
Each Intuos3 tool has a Tool ID that makes it unique. Any custom
settings apply only to the specific tool for which they were made.
Identical Intuos3 tools will appear as numbered devices. The
selected tool is highlighted.
list, the appropriate tab settings for that tool are
OOL
list's [ – ] button. In the dialog box that
OOL
list.
OOL
C I
ONTENTS NDEX
C
USTOMIZING
51
Removes the
selected tool.
The F
UNCTIONS
icon cannot be
deleted.
The button is
inactive when there
is only one item in
the list.
list and you can
OOL
list by placing
OOL
51