Clearing A Staple Jam; Staple Jam In The Finisher - Toshiba e-studio 2040c Troubleshooting Manual

Clearing a Staple Jam

When a staple jam has occurred in the stapler of the Finisher or Saddle Stitch unit, clear the jam following the procedure
below.
P.43 "Staple jam in the Finisher"
P.47 "Staple jam in the Saddle Stitch unit (MJ-1106)"

Staple jam in the Finisher

Finisher MJ-1101 / MJ-1106
1
Open the front cover of the finisher.
An illustration of MJ-1101 is given in the right-hand figure.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the jammed staples.
1 TROUBLESHOOTING FOR THE HARDWARE

Clearing a Staple Jam

43