Clearing A Staple Jam; Finisher - Toshiba e-Studio2000AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series;
e-studio5008lp series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2000AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
Clearing a Staple Jam
0.
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the
procedure below.
P.66 "Finisher"
P.71 "Saddle Stitch unit"
Finisher
Finisher / Saddle Stitch Finisher
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
Lower the guide while holding the knob.
3
Do not touch the stapling area.
The actual needle point could cause you personal injury.
66 Clearing a Staple Jam
Hide quick links:
Advertisement
Table of Contents
