Clearing A Staple Jam; Staple Jam In The Finisher Mj-1027 / Saddle Stitch Finisher Mj-1028 - Toshiba e-studio556 Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

Clearing a Staple Jam

When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure
below.
 P.34 "Staple jam in the Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028"
 P.35 "Staple jam in the Saddle Stitch Finisher MJ-1029"
 P.37 "Staple jam in the saddle stitch unit"
 Staple jam in the Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028
Open the front cover of the finisher.
1
Lower the lever of the stapler to release the lock, and
2
then take out the staple cartridge.
Lower the guide while holding the knob.
3
Do not touch the stapling area.
The actual needle point could cause you personal injury.
Remove all jammed staples with something sharp.
4
34

Clearing a Staple Jam

1
2